pipe links first, and then your side by gas flow meter to measure the amount of nitrogen, as far as possible according to your site of industrial and mining to choose an appropriate flow meter to measure, nitrogen vortex flowmeter can also be used to measure the

Anyone who has seen the latest electromagnetic flow meter slurry mass flow meter in operation cannot help but be impressed with how far the technology has progressed over the past few years.
Helping our customers manage document workflow and increase efficiency through best-in-class mass flow meter and services. Fostering the growth and development of our employees.
While manufacturing mass flow meter, we always pay attention to the technology and quality of the product.
People tend to want what they perceive they cannot have. Making Sincerity seems exclusive or as if it will go out of stock if they don't act quickly often makes it more enticing to the consumer and increases the likelihood that they will buy in.

Abstract: the oval gear flowmeter scale installation and matters needing attention of information produced by excellent flow meter, flow meter manufacturer to offer you the quotation.

Oval gear flowmeter is used to measure the liquid flow precision instrument, accumulated direct reading instrument, is the sum of measuring liquid flows through the pipe flow displacement meter.

Products choose mechanical display meter and electronic display meter two counts, display table.

More flow meter manufacturers choose model price quote you are welcome to inquire, here is the oval gear flowmeter scale installation and matters needing attention for details.

Oval gear flowmeter is used to measure the liquid flow precision instrument, accumulated direct reading instrument, is the sum of measuring liquid flows through the pipe flow displacement meter.

Product choose mechanical display meter and electronic display meter two counts, display header has accumulated flow and transient flow and back to zero, which can realize the scene display and remote control.

Oval gear flowmeter installation 1, before installation should be thoroughly clean the pipe, and in front of the flowmeter filter installation, in order to prevent debris into the meter.

When measured liquid containing gas, should install air separator.

2, should pay attention to must take meter oval gear shaft United States level, namely the dial and perpendicular to the plane.

Flow adjustment and start, shut off the valve should be installed in the import and export of flow meters respectively.

3, flowmeter shell on the arrow pointing in the direction of piping shall be installed with the liquid flow in the same direction.

4, the continuous flow of pipeline, the installation of flowmeter horizontal line should be equipped with a bypass valve, in order to regular cleaning and maintenance.

On the vertical pipe flow meter, shall be installed in the bypass duct to prevent debris into the instrument.

5, under the condition of correct installation of the flow meter, for ease of reading, can according to the need to counter rotating 180 & deg;
Or 90 & deg;

Oval gear flowmeter note 1, instrument installation shall be made in the direction of the arrow direction as shown on instrument housing and liquid flow in the same direction, the installation position should be paid attention to easy reading.

2, instrument installation as far as possible in normal situation, do not install in place of harmful gases and strong heat radiation, prevent the meter counter parts from damage.

3, instrument of the elliptical gear shaft installed into a horizontal position as much as possible, namely the readout panel shall be installed in vertical position (
Counter positive parallel to the ground)

, in order to reduce friction between the elliptical gear and shell, the lower parts of wear and tear.

Due to the installation position is different, in order to facilitate reading, can be counters (
Header)
Rotate it 90 & deg;
Or 180 & deg;
。

4, instrument before installation, pipeline must be thoroughly cleaned and in the whole pipeline system, without strict filtering device, filters should be installed in front of the instrument, to prevent impurities into the table.

5, meter should be installed at the outlet of the pump, flow control valve should be installed on the downstream side of the instrument.

When used to open the upstream shutoff valve and then slowly open the downstream flow control valve or valve.
It is forbidden to suddenly open or closed.

6, instrument when use, should make the inflow table filled with liquid.

Within the measured liquid should not be mixed with gas, or a mixture of gas and liquid volume is measured, the measurement, the liquid mixed with gas, within the instrument must be installed upstream gas separator.

7, of the pipeline flow should not increase or decrease sharply, should avoid pipeline hydraulic shock and vibration, pressure phenomenon such as volatility, otherwise will affect the normal work of the instrument.

8, when the flow rate is in excess of that specified maximum flow, oval gear wear increases with the rotating speed increases, and the pressure loss has increased dramatically, should avoid to use.

Below the minimum flow, is still can measure, but the error increase.

Meter starting flow is about 2% of the maximum flow, work flow for - 70% of the maximum flow
80%.

9, because when measuring high viscosity liquid, usually in order to reduce the viscosity of liquid heating, then the flow in the pipe (
With both insulation clip model flow meter)
。

After the instrument downtime, instrument inside filled with liquid by cooling and become sticky, such as to enable the again, must be used on the outside of the table body heat, steam or other methods to reduce the viscosity of the liquid, the liquid viscosity reduced in the instrument to use.

Or mucus will bite transmission parts, instrument damage.

10, measured liquid temperature should not be higher than the specified value, otherwise, the instrument can not work normally, even stuck, counter parts easily damaged at high temperature.

The liquid temperature change can cause additional error viscosity influence.

11, each instrument factory, all use 0 # diesel oil at room temperature calibration, at room temperature, the viscosity of the oil is about 3 mpa.
s。

If user use this large difference with the liquid viscosity, or need to reset the gear ratio flow coefficient.

Above is all there is in this article, you are welcome to inquire me manufacturer flowmeter selection, quotation, etc.
The increasing consumption demand in key segments such as insertion ultrasonic flow meter, endress hauser coriolis mass flow meter and low flow turbine flow meter have been driving the sales of and its derivatives worldwide.
Growing revenue is a common goal for many businesses. We want to be sure Sincerity include leaders from the marketing, sales and production departments to help make certain that the goals we choose are appropriate and have strong support.
In conjunction with retraining and upskilling efforts, Beijing Sincerity Automatic Equipment Co., Ltd’s workers should focus on growing unique human skills that high-tech machines are unable to replicate, such as strategic and abstract thinking, complex communications, creativity and leadership competencies.
have three basic components.
But we do think that reckoning with supply chains of mass flow meter is a really important step. Even super simple switches in material, or sourcing, or shipping, or worker benefits seems like good place to start.

Abstract: how to select the metal tube flow meter scale information produced by excellent flow meter, flow meter manufacturer to offer you the quotation.

How to select the product overview of metal tube float flowmeter flow meter is commonly used in industrial automation process control of a variable area flow meter.

It has small volume, wide detection range, convenient use, etc.
It can be used to measure the liquid.

More flow meter manufacturers choose model price quote you are welcome to inquire, here is how to select the metal tube flow meter scale article details.

How to select the product overview of metal tube float flowmeter flow meter is commonly used in industrial automation process control of a variable area flow meter.

It has small volume, wide detection range, convenient use, etc.

It can be used to measure the rate of flow of liquid, gas and steam, especially suitable for low velocity of small flow of medium flow measurement.

It has intelligence have on the display and intelligent remote transmission, with a pointer display instantaneous/cumulative flow, liquid crystal display (LCD), the lower limit alarm output, cumulative pulse output, batch control, the standard two wire 4 ~ 20 ma output current, and other forms.

Provides users with a very broad choice space.

The other the instrument adopts the advanced central microprocessor chip and high quality industrial components.

According to different measuring tube structure, the first instrument technology metal pipe flow meter can choose a different sounding pipe form according to the customer's request, has further perfect in maintenance and cleaning.

On this basis, the match type intelligent metal tube flow meter indicator, can constitute a intelligent metal tube flow meter.

Over the years, various excellent performance and reliability of metal tube float flowmeter, and good performance/cost ratio.

Widely by the petrochemical, steel, electric power, metallurgy, light industry, food, pharmaceutical, water treatment.

Structure principle 1, HLZ series of metal tube float flowmeter is mainly composed of two parts: the measuring tube HR -
F indicator.

Measuring pipe including cone or orifice plate, guide, stop, float and other components, indicator including magnetic servo system, pointer, engraved plate, circuit components, etc.

2, the working principle of bottom-up measured medium flows through the top and bottom end of sounding pipe float the differential form upward force, when the float is greater than in the rising force in the fluid in the float weight, float up, clearance area increase, the gaps in the fluid velocity drops rapidly, float up and down the differential pressure is reduced, applies to float up with reduced, until the lift float weight balance and immersed in the fluid, the float is stable at a particular location, float position of instant corresponds to the size of the measured medium flow.

Move up and down in float float the built-in magnet steel, medium, magnetic field changes with the movement of the float.
一个。

For in situ type, by in situ indicator within the follow-up magnetic steel and the float of magnetic coupling and turning, drives the pointer at the same time, through the dial indicates that the flow at this time.
b。

For intelligent by intelligent indicator of follow-up magnetic steel and the float inside the magnetic coupling, and rotation.

Sensing magnetic steel and pointer at the same time, through A magnetic sensor to magnetic field changes into electrical signals, after A/D conversion, digital filtering, temperature compensation, microprocessor processing, D/A output, LCD liquid crystal display (LCD), to show the size of the instantaneous flow and cumulative flow.

Suitable for small diameter low velocity of gas, liquid and steam flow measurement.
2.
Magnetic coupling principle of high voltage without leakage.
3.
High temperature resistant, up to 450 ℃.
4.

Should not be affected by a certain viscosity, measuring high viscosity medium.
5.

When the flow rate is in excess of 100 m3 / h water flow, pressure loss.
6.

For process control instrument, zui good accuracy is 1%, general is 1.
5%, the range than 10:1.
7.

The explosion-proof, flameproof all Ann, suitable for dangerous situations.
8.

With in situ pointer type, cell type, two wire, 220 v ac power supply, and other forms to choose from.
9.

Zui on appropriate installation for the next into the vertical installation.
10.
Measuring high temperature and low temperature (
-
Below 30 ℃)
Medium, zui good used of model.
11.
Not suitable for measuring large medium density change.
12.
Not suitable for measuring pulse medium flow (
Such as metering pump export)
。
13.

For gas in no temperature pressure compensation, need to consider separately.
14.

For more than one instrument installation or dense carbon steel piping through the instrument near to the instrument to keep a distance of more than 100 mm, avoiding interference magnetic field.
15.

Contains a lot of ferromagnetic particles medium flow measurement, to add magnetic filter in front of the instrument, and purging time.
16.

Metal tube flow meter requirement for straight pipe is not high, generally for the first 5 d after 250 mm.
17.

If choose flame-proof occasions to use instrument, should choose round shell M4 indicator.
18.

Flowmeter OC gate way, high and low alarm is usually open collector current amplification should be carried out with relay, and optional relay output type, contact capacity of a 30 VDC @ 1 or 0.
25 a @ 250 vac or 0.
5A@125VAC。

Above is all there is in this article, you are welcome to inquire me manufacturer flowmeter selection, quotation, etc.
Beijing Sincerity Automatic Equipment Co., Ltd is the largest manufacturer of mass flow meter, which is one of the best product manufactured from us.
See reviews of the latest trend in mass flow meter industry at Sincerity Flow Meter, and see the best that work in just minutes! Visit us right away!
The key to mass flow meter is understanding where there is a problem or need in certain markets and knowing how to solve it.
The only cardinal rule with adding animation is to keep high-quality on mass flow meter.

Abstract: how to realize high precision measurement in the use of electromagnetic flowmeter scale information produced by excellent flow meter, flow meter manufacturer to offer you the quotation.

From refinery to active vending machines and other industrial use requirements with accurate temperature, pressure and flow measurement, in order to control clutter and brief process.

In the food industry, for example, bottled and canned goods traffic accurate control will directly affect the profit, and therefore there will be.

More flow meter manufacturers choose model price quote you are welcome to inquire, here is how to achieve high precision in the use of electromagnetic flowmeter scale to measure the article details.

From refinery to active vending machines and other industrial use requirements with accurate temperature, pressure and flow measurement, in order to control clutter and brief process.

In the food industry, for example, the flow of bottled and canned goods accurately control will directly affect the profit, and therefore it is necessary to zui large decrease in flow measurement error.

Supply flowmeter skills summary, this article points to comment on the liquid flow one of zui high precision in the measurement of electromagnetic flowmeter.

Traffic industrial electromagnetic flowmeter measurement profile from refinery to active vending machines and other industrial use requirements with accurate temperature, pressure and flow measurement, in order to control clutter and brief process.

In the food industry, for example, the flow of bottled and canned goods accurately control will directly affect the profit, and therefore it is necessary to zui large decrease in flow measurement error.

Similarly, closed transportation use & ndash;

For the oil industry exchange between tank and tank truck in crude oil and refined oil & ndash;
Demand for high accuracy measurement.

Supply flowmeter skills summary, this article points to comment on the liquid flow one of zui high precision in the measurement of electromagnetic flowmeter.
Figure 1.

Measurement and control the fundamental system of liquid velocity measurement of flow velocity, a variety of different skills include differential pressure, coriolis force, ultrasonic and electromagnetic, etc.

Zui commonly used is the differential pressure flow meter, but they are of system pressure change is more sensitive.
The precision of the coriolis flowmeter has high zui (
Up to 0.
1%)
Capital, but they are large and expensive.

Ultrasonic flowmeter is generally small, capital is low, but the precision co. , LTD. (
Typical values of 0.
5%)
。

Selects the noninvasive measurement of ultrasonic flowmeter skills, improve the reliability of zui much together to reduce the influence of test elements of change with time, but cannot be used for dirty water or contaminated liquids.
Electromagnetic flowmeter can also supply noninvasive detection.

These devices can be used in the acid, alkali and ionic liquid & ndash;

The liquid conductivity of size 10 S/m to 10 & ndash;

6 s/m, and so clean, dirty, corrosion, erosion or viscous liquid or slurry, but does not apply to hydrocarbons or gas flow measurement.
They can for the diameter as small as about 0.

125 inches, zui large capacity of 10 cubic feet of low velocity and high flow rate of supply system of relatively high precision (
0.
2%)

, and even under the lower velocity can also insist on reading repeatability.

They can measure the bidirectional flow, namely the upstream or downstream.

Table 1 compares several common flowmeter skills.

Above is all there is in this article, you are welcome to inquire me manufacturer flowmeter selection, quotation, etc.
With new and upcoming social commerce technologies, the biggest change for mass flow meter marketers will be a shift in focus from branding to lead generation and conversion.
Beijing Sincerity Automatic Equipment Co., Ltd will provide branded products and services of superior quality and value that improve the lives of the world’s consumers.
Regularly improving mass flow meter in accordance with customer feedback is a great way to show your brand listens and cares.
endress hauser ultrasonic flow meter mass flow meter is slower than vortex flow meter manufacturer but has a number of special applications, such as for fork density meter manufacturer.
Beijing Sincerity Automatic Equipment Co., Ltd emphasizes our commitment to quality in our laboratory and R&D services.

Abstract: the electromagnetic flow meter scale connection information produced by excellent flow meter, flow meter manufacturer to offer you the quotation.

Huaian control of electromagnetic flowmeter is a kind of high precision, high reliability and long service life of flow meter, is by direct contact with the pipeline medium is composed of the sensor and the upper signal converters.

It is based on Faraday's law of electromagnetic induction, which is used to measure.

More flow meter manufacturers choose model price quote you are welcome to inquire, here is the connecting way of electromagnetic flow meter scale article details.

Huaian control of electromagnetic flowmeter is a kind of high precision, high reliability and long service life of flow meter, is by direct contact with the pipeline medium is composed of the sensor and the upper signal converters.

It is based on Faraday's law of electromagnetic induction, which is used to measure conductivity greater than 5 & mu;

S/cm of conductive liquid flow, is a kind of measuring instrument of conductive medium flow.

In addition to general conductive liquid flow can be measured, can also be used for measuring strong corrosive such as strong acid, strong alkali liquid, it and the pipe connection means has the following kinds: a, flange connection: the connection is more traditional, electromagnetic flowmeter has can be connected at both ends of the flange, when connected to the pipe, as long as the ends of flange and pipe flange bolted for the good, the connection can be installed in a one-way.

The connection of sensor volume is small, only suitable for use in small pipes.

Second, clamp connections: this is a more advanced connection mode, some without their own flange of electromagnetic flowmeter USES is the connection, can use a bolt clamping between two pipe flanges, connection mode is straightforward.

Electromagnetic flowmeter installation method, it is necessary to known for clamp connection time won't appear mistake.

Three,, threaded connections: there are some small diameter electromagnetic flowmeter USES is threaded connection, generally in the medical, food industry will use this connection.

In addition, the connection for the exploration of oil, also has the certain application.

Four, health type connection: now some of the small diameter pipeline in this connection, we are often called type health connection is clamp connection, in this connection, can quickly install and remove the electromagnetic flowmeter, the daily cleaning and maintenance is very convenient.

Even contain liquid solid two phase suspension liquid, such as mud, pulp, pulp above is all there is in this article, you are welcome to inquire me factory flowmeter selection, quotation, etc.
need huge investment, so it is important to shop with caution.
Beijing Sincerity Automatic Equipment Co., Ltd also values the time, skills, and expert opinions of our staff. We are committed to providing fair and living wages, reasonable, structured work schedules, and clear duties and spheres of rights and responsibilities for each team member.
Simultaneously being able to offer not only the product but also the service, gives the customer a quality 'one-stop-shop' service.