Abstract: the installation technology of intelligent precession vortex gas meter scale information produced by excellent flow meter, flow meter manufacturer to offer you the quotation.

Intelligent vortex precession gas meter adopts the new zui micro processing technology, has the function of strong, wide flow rate range, simple operation and maintenance, installation convenient use, the main technical indexes reach the advanced level of the same products abroad.
Widely used in petroleum, chemical industry, the city.

More flow meter manufacturers choose model price quote you are welcome to inquire, here is the installation technology of intelligent precession vortex gas meter scale article details.

Intelligent vortex precession gas meter adopts the new zui micro processing technology, has the function of strong, wide flow rate range, simple operation and maintenance, installation convenient use, the main technical indexes reach the advanced level of the same products abroad.

Widely used in petroleum, chemical industry, city gas, electric power, metallurgy, coal and other industries of various gas measurement.
Intelligent vortex precession gas meter installation 1)
The meter shall be installed according to the flow marks.
2)

Flow meter can be horizontal, vertical, or any Angle to install.
3)
Upstream and downstream straight pipe requirements as shown in figure 4)

In addition to contain particles within the measured medium or long fibrous impurities, generally do not need to install filters.
5)

Flow around should not have strong external magnetic field interference and strong mechanical vibration.
6)
The meter must be reliable grounding.

Intelligent vortex precession flowmeter main technical parameters of 1, flowmeter specification, basic parameters and performance index 2, standard conditions: P = 101.
325 kpa, T = 293。
15 k3, conditions of use: ambient temperature: -
20 ~ + 60 ℃ medium temperature: -

20 ~ + 80 ℃ relative humidity: 5% ~ 95%, atmospheric pressure 86 kpa to 106 kpa4 working power supply, electric performance index: external power: + 24 VDC power supply: 3.

6 v lithium-ion batteries and power consumption: the external power,

Abstract: the instruments.

Sensor using note information produced by excellent flow meter, flow meter manufacturer to offer you the quotation.

In engineering machinery vehicles, instruments, sensors, the effect is obvious, its working state of the machine and effective monitoring.

As it does not work, there is no feedback to the operator information, also cannot find the problems in a timely manner.
one

More flow meter manufacturers choose model price quote you are welcome to inquire, below is the instrument.
Notes on the sensor using the article details.

In engineering machinery vehicles, instruments, sensors, the effect is obvious, its working state of the machine and effective monitoring.

As it does not work, there is no feedback to the operator information, also cannot find the problems in a timely manner.
A, the use of the instrument installation considerations.

Instrument must be matched sensors are used together.

Wire connection is reliable, shall not be in other metal conductor in contact.

Installation and removal, don't knock and knock against.

Ammeter the positive and negative polarity is, generally, engineering machinery is the vehicle for negative ground, then the ammeter & other;
吗?
”

Terminal connected battery anode, & other;
＋”
Terminal can alternator armature end (
Ｂ＋）
。

Ammeter before connection washers, nuts, bolts, etc should be contact with sandpaper clean, installing a nut, apply clean engine oil, can prevent rust and easy to tear open outfit;

Surface insulation gasket should be in good condition, and insulation gasket between the spring washer should be put in a flat gasket and prison, lest make the thrum fever because of poor contact, even burning instrument and wiring harness.

Ammeter and voltmeter wiring should pay attention to the vehicle power supply shut down, so as not to cause a short-circuit.
On the voltmeter & other;
＋”
Connect battery anode, & other;
吗?
”
Battery negative pole, not wrong.
Second, the use of the sensor installation considerations.

The movement of the float should be flexible in the tank, otherwise will be caused by interference float and diaphragm tank indicator is not allowed.
Fuel sensor grounding should be reliable.

Moving magnet type oil scale variable resistor sensor resistance will increase with internal fuel tank higher plane.

Grounding should be reliable, wire connection of sensor shall not be short circuit.

Moving magnet type water thermometer sensor thermistor will as temperatures rise, resistance decrease.

Moving magnet type pressure gauge of substation resistance increased with the pressure.

Installation of pressure sensor, we don't twist the shell directly.

If any alarm sensor, the sensor line and do not pick up the warning line.

0 mm, otherwise it will cause indicates a phrase.

Correct installation method is that sensor first turn to the end, the sensor at the bottom of the engines at the top of the gear tooth, then counterclockwise cyclotron two-thirds, reoccupy back nut fastening.

0 v.

Above is all there is in this article, you are welcome to inquire me manufacturer flowmeter selection, quotation, etc.
Clouds of rosemount vortex flow meter failures surround the world of rosemount coriolis mass flow meter in particular, simply because people don’t pay as much attention to the mass flow meter as they should do.
Beijing Sincerity Automatic Equipment Co., Ltd is one of China's biggest providers in the following categories of products: mass flow meter, low flow turbine flow meter, u shape coriolis mass flow meter,etc. We also welcome ODM and OEM orders, and offer the highest standards of service, the cheapest deals, and the best buying experience. Get to know us at Sincerity Flow Meter.
endress hauser ultrasonic flow meter mass flow meter is slower than tuning fork liquid density meter but has a number of special applications, such as for coriolis density meter.

Abstract: the precession vortex flow meter scale using note information produced by excellent flow meter, flow meter manufacturer to offer you the quotation.

Any kind of measurement instrument has its particularity, intelligent precession vortex gas flowmeter is no exception.

In order to make this kind of gas meter can better serve the work flow metering, from jiangsu huaian control technical personnel more than automation instrument co. , LTD.

More flow meter manufacturers choose model price quote you are welcome to inquire, here is a precession vortex flow meter scale using note article details.

Any kind of measurement instrument has its particularity, intelligent precession vortex gas flowmeter is no exception.

In order to make this kind of gas meter can better serve the work flow metering, the scene of many years of practical experience from the instrument shows that the following aspects of considerations should cause enough attention about the management and use the department.
1, attaches great importance to the instrument selection.
In the already selected instrument types (
For example, the intelligent precession vortex gas meter)

, followed by the selection of instrument specifications and its supporting element is crucial.
In a word, choose the right to use well.

Therefore, in the process of selection should grasp two basic principles;

Namely: to ensure the use of precision, to ensure production safety.

To do this, we must to carry out the selection of the three parameters, namely the immediate and long-term zui, zui small and common instantaneous flow (
Mainly used for the size of the selected instrument specifications)
, and the design of the measured medium pressure (
It is mainly used for the selected instrument nominal pressure level)
Work pressure, (

Mainly used for the selected instrument of pressure sensor pressure level)
。
2, for calibration before use.

On the one hand, given the current on-site verification for this kind of instrument in such and such difficulties.

In addition, if the intent of the purchase is ready to apply the this kind of instrument to the more important measurement occasions, such as heavy traffic trade dispute of measurement or prominent measurement point, and use the site also does not have the flow online calibration conditions, so in this case, with only when buying a paper factory qualified certification provided by the manufacturer can easily determine the table all qualified performance, it is too early.

Therefore, in order to ensure the working process of the instrument in the future in its measuring result is reliable and accurate, it is necessary before the formal installation to be taken to have the detection capability and qualification of the department for a full flow within the scope of the system verification.
3, do a good job in installation process.

Although this kind of flow meter to process installation and use of the special requirements of environment is not too much, but any kind of flow measurement instrument has such a common, as far as possible to avoid vibration and high temperature environment as flow interference elements (

Such as compressor, separator, pressure regulating valve, reducer and pipe, elbow, etc. )

And keep straight pipe before and after the meter wall smooth and flat, ensure clean measured medium of single-phase fluid, etc.
4, strengthen the management of late.

Although this kind of instrument with multiple automatic disposal function and the characteristics of micro power consumption, but still need to strengthen the management after put into operation.

For example, in order to ensure the accuracy of the long-term work flow, reliability,
To avoid unexpected shutdown and loss of data)
, it should be on a regular basis system calibration (
Every 1 ~ 2 years)
, transcribing header data (
Daily or weekly)
, replacement medium parameters (
Monthly or quarterly)

And don't regularly check the battery status, check the instrument coefficient and seal, etc.
5, pay attention to the internal maintenance.

If due to temperament dirt or other need for instrument measuring cavity and its components in regular inspection or cleaning, so one thing you must pay special attention to: for the same specifications of the vortex precession flowmeter, the vortex occurred, the diversion and other core components are not interchangeable, otherwise, must be to calibrate the instrument measurement coefficient and the matching of the temperature and pressure sensor calibration system.

Above is all there is in this article, you are welcome to inquire me manufacturer flowmeter selection, quotation, etc.
Look at the trends, both economic and consumer, for indications on your Beijing Sincerity Automatic Equipment Co., Ltd's staying power.
Sincerity Flow Meter has a whole range of different items to help you make an informed choice every time you make a purchase. Check it!
Along the way, Beijing Sincerity Automatic Equipment Co., Ltd will face a wide range of challenges. The most successful will show our resolve by working through the challenges and finding ways to improve and grow.
Visit Sincerity Flow Meter for the best in vortex flow meter manufacturer mass flow meter supplies and get the most cost effective for your mass flow meter solution. Design and customization are also welcomed.
The risk of rosemount coriolis mass flow meter is reduced by endress hauser ultrasonic flow meter with the consumption of .

Abstract: The information on the working principle and installation requirements of thermal resistance sensors is provided by excellent flowmeter and flowmeter manufacturers and quotation manufacturers. The thermistor in the thermal resistance sensor is a new type of semiconductor temperature measuring element. It is the carrier that participates in conduction in the semiconductor. Since the number of carriers in the semiconductor is much less than the number of free electrons in the metal, its resistivity is large. with temperature. For more flowmeter manufacturers to select models and price quotations, you are welcome to inquire. The following are the details of the article on the working principle and installation requirements of the thermal resistance sensor. The thermistor in the thermal resistance sensor is a new type of semiconductor temperature measuring element. It is the carrier that participates in conduction in the semiconductor. Since the number of carriers in the semiconductor is much less than the number of free electrons in the metal, its resistivity is large. As the temperature increases, more valence electrons in the semiconductor are thermally excited to transition to higher energy levels to generate new electrons—The number of hole pairs, and thus the number of carriers participating in electricity, increases, and the resistivity of the semiconductor decreases (conductivity increases). Because the number of carriers increases exponentially with temperature, the resistivity of semiconductors decreases exponentially with temperature. A thermistor is a temperature-sensitive element made of semiconductors that change the number of carriers with temperature. When the temperature changes by 1°C, the resistance value of some semiconductor thermistors will change by (3 to 6)%. Under certain conditions, the temperature change pressure sensor is obtained according to the change of the measured thermistor value. The installation of thermal resistance sensor requires attention to the installation of thermal resistance, which is conducive to accurate temperature measurement, safe and convenient maintenance, and does not affect equipment operation and production operations. To meet the above requirements, pay attention to the following points when choosing the installation position and insertion depth of the thermal resistance: 1. In order to ensure sufficient heat exchange between the measuring end of the thermal resistance and the measured medium, the location of the measuring point should be selected reasonably , try to avoid installing thermal resistance near valves, elbows and dead ends of pipes and equipment. 2. The thermal resistance with a protective sleeve has heat transfer and heat dissipation losses. In order to reduce the measurement error, the thermocouple and the thermal resistance should have sufficient insertion depth: (1) For the thermal resistance measuring the fluid temperature in the center of the pipeline, generally it should be Insert its measuring end into the center of the pipe (vertical or inclined). If the pipe diameter of the fluid to be measured is 200 mm, the insertion depth of the thermal resistance should be 100 mm; (2) For the temperature measurement of high temperature, high pressure and high-speed fluids (such as the main steam temperature), in order to reduce the resistance of the protective sleeve to the fluid and To prevent the protective sleeve from breaking under the action of the fluid, the protective tube can be shallowly inserted or the thermal sleeve type thermal resistance can be used. The depth of the shallow-inserted thermal resistance protection sleeve shall not be less than 75mm into the main steam pipe; the standard insertion depth of the thermal resistance of the thermal sleeve is 100mm; (3) If it is necessary to measure the temperature of the flue gas in the flue, although the smoke The diameter of the channel is 4m, and the insertion depth of the thermal resistance is 1m; (4) When the insertion depth of the measuring element exceeds 1m, it should be installed as vertically as possible, or a support frame and a protective sleeve load cell should be installed. The above is the whole content of this article. You are welcome to inquire about the flowmeter selection and quotation of our factory. 'Thermal resistance sensor working principle and installation requirements'
Beijing Sincerity Automatic Equipment Co., Ltd’s administrative systems and management team are extraordinary-you'll need them to get a new location up and running.
You can find a large selection of quality at Sincerity Flow Meter. Go get your desired one.
Sincerity focuses on three key elements—process, people, and technology—the authors found that people of two seemingly opposite cultures are able to work together in a project-based environment to complement each other and reap mutual benefits for a win-win result.
The team of engineers and developers at Beijing Sincerity Automatic Equipment Co., Ltd are the best in their own way and we promise to provide timely service to our esteemed clients.

Abstract: The information on the installation and maintenance of the precession vortex flowmeter is provided by the excellent flowmeter and flowmeter manufacturers. If the precession vortex flowmeter is improperly installed and maintained, it will not only affect the measurement accuracy, but also damage the instrument in severe cases: when moving the precession vortex gas flowmeter, the slings should be put on the necks of both ends of the flowmeter flange. Do not measure at the external position. More flowmeter manufacturers choose models and price quotations. You are welcome to inquire. The following is the details of the installation and maintenance method of the precession vortex flowmeter. If the precession vortex flowmeter is improperly installed and maintained, it will not only affect the measurement accuracy, but also damage the instrument in severe cases: when moving the precession vortex gas flowmeter, the slings should be put on the necks of both ends of the flowmeter flange. Do not insert a pipe rod into the measuring tube for hoisting at the top position, so as to avoid damage to the lining, and at the same time, prevent the wiring socket of the screw-in vortex flowmeter from being damaged by collision. It must be ensured that the center of the precession vortex gas flowmeter is consistent with the center of the process pipeline, and the grounding wire must be connected, otherwise errors will be caused. The precession vortex flowmeter has no mechanical moving parts, small size, corrosion resistance, and stable performance; it can directly display the working pressure, temperature, flow rate of the medium and the gas volume in the standard state; it has the advantages of wide range and small measurement error. It is widely used in production measurement of oil and gas wells and sales measurement of natural gas. In field applications over the years, we believe that this flowmeter is most suitable for relatively clean dry gas measurement, and has gradually become the first choice for small and medium gas measurement. It is necessary to ensure the accurate measurement of the precession vortex flowmeter and reduce the measurement error. The precession vortex gas flowmeter generally does not require daily maintenance, but the measured medium is easy to adhere or scale on the inner wall of the electrode and the measuring tube. The inner wall of the measuring tube and the electrode must be cleaned regularly, and the lining and the electrode should not be damaged. When the precession vortex gas flowmeter fails, please refer to the following reasons to find out, analyze the reasons, and eliminate the fault one by one. 1. Whether the pipeline is full, and whether the lining and electrodes are scaled. 2. Whether all cable connections are reliable. 3. Whether the grounding requirements are met. 4. Whether the magnetic coil is short-circuited or open-circuited, and whether it is insulated from the ground. 5. Whether the pipeline leaks, whether the upstream and downstream valves are affected, and whether the installation position is appropriate. The above is the whole content of this article. You are welcome to inquire about the flowmeter selection and quotation of our factory. 'Method of installation and maintenance of precession vortex flowmeter'
mass flow meter has become a standardized way of dealing with coriolis mass flow meter emerson.
The guiding vision of Beijing Sincerity Automatic Equipment Co., Ltd is 'Bringing the best to everyone we touch'. By 'The best', we mean the best products, the best people and the best ideas.
Beijing Sincerity Automatic Equipment Co., Ltd always believes that the average profitability of our company is sufficient.
Beijing Sincerity Automatic Equipment Co., Ltd can reassign work or shuffle around assigned tasks if one team member is overwhelmed while others are not, more effectively managing resources on the fly. With detailed overviews and reports, manufacturers also can more easily stay abreast of new developments.
With a complete manufacturing plant, Beijing Sincerity Automatic Equipment Co., Ltd is able to meet the most stringent specifications, no matter the type of product. A dedicated team of experts handle these value-added services, ensuring that customer needs are met on time, consistently monitoring quality and performance of mass flow meter to the highest international standards. Visit Sincerity Flow Meter to learn more.