Several aspects to pay attention to when installing a turbine flow meter

Abstract: Several aspects of information that need to be paid attention to when installing a turbine flow meter are provided by excellent flow meter and flow meter manufacturers. Turbine flowmeters are widely used to measure liquids with stainless steel and cemented carbide that corrode in closed pipelines, and have no impurities such as fibers and particles. The kinematic viscosity at working temperature is less than 510-6m2/s. /s of liquid, can be opposite flow. More flowmeter manufacturers choose models and price quotations. You are welcome to inquire. The following are the details of the articles that need to be paid attention to when installing turbine flowmeters. Turbine flowmeter is widely used to measure the corrosion of stainless steel and cemented carbide in closed pipelines, and has no impurities such as fibers and particles. The kinematic viscosity at working temperature is less than 5.×10-6m2/s liquid, for kinematic viscosity greater than 5×The liquid of 10-6m2/s can be used after real-liquid calibration of the flowmeter, and it can also be used for quantitative control, over-amount alarm, etc. It is an ideal instrument for flow measurement and energy saving. The main points to note include: * After installing the liquid turbine flowmeter, be sure to carefully study the liquid turbine flowmeter manual. Be good at analyzing and thinking about the problems encountered in the initial operation. The whole set of liquid turbine flowmeter has been adjusted and calibrated on the flow calibration device of the manufacturer. As long as the matching number of the sensor and the converter, and whether the instrument coefficient is correct, etc., the general liquid turbine flowmeter can be put into operation without any adjustment. Second, before the instrument is put into operation, the liquid turbine flowmeter sensor must be filled with the actual measurement medium, and the zero point adjustment should be made in a static state after power-on. After being put into operation, it is also necessary to stop the flow to check the zero point regularly according to the medium and the conditions of use. Especially for the non-clean medium that is easy to precipitate, easy to contaminate the electrode, and contains solids, more inspections should be carried out in the early stage of operation to gain experience and determine the normal inspection period. Third, if the contact resistance of the two electrodes changes, it indicates that the electrodes of the liquid turbine flowmeter are likely to be contaminated; if the contact resistance increases, the contamination may be insulating deposits; if the contact resistance decreases, it may be contaminated The deposit is a conductive deposit; the contact resistance of the two electrodes is asymmetric, indicating that the two electrodes are polluted differently; the decrease in the insulation resistance of the electrode and the excitation coil indicates the degree of dampness of the liquid turbine flowmeter sensor; when the insulation resistance drops to a certain level degree, will affect the normal work of the instrument. The above is the whole content of this article. You are welcome to inquire about the flowmeter selection and quotation of our factory. 'Several aspects to pay attention to when installing a turbine flow meter'

Beijing Sincerity Automatic Equipment Co., Ltd specializes in undertaking corporate offers to cater the needs of different companies.

Beijing Sincerity Automatic Equipment Co., Ltd is a company that offers reliable products. For customization, vortex flow meter manufacturer and low flow turbine flow meter in different styles are also in the offer list. Click Sincerity Flow Meter for more details.

have three basic components.

The above are only part of the examples regarding mass flow meter, for more information, please click here Sincerity Flow Meter.