Plastic tube rotameter scale installation use policies

Abstract: the plastic tube rotameter scale installation strategy information produced by excellent flow meter, flow meter manufacturer to offer you the quotation. HC - LZS type plastic tube rotameter taper pipe main parts are produced by the AS, ABS plastic, good corrosion resistance, with reasonable structure, small volume, light weight, taper tube is not easy to broken, etc. Can be widely used in chemical industry, environmental protection, food and other industrial sectors. 。 More flow meter manufacturers choose model price quote you are welcome to inquire, here is a plastic tube rotameter scale installation using policy article details. HC - LZS type plastic tube rotameter taper pipe main parts are produced by the AS, ABS plastic, good corrosion resistance, with reasonable structure, small volume, light weight, taper tube is not easy to broken, etc. Can be widely used in chemical industry, environmental protection, food and other industrial sectors. Main measuring element for a small plastic tube rotameter end down, big end up vertical installation of tapered plastic pipe and its float, can move up and down. Plastic tube rotameter installed (1) before the installation, should be within the meter foam supports with tool tip nose pliers gently put it out, and then install it again, when installation, pay attention to the rubber gasket is in control of the groove of in case of leakage. (2) flowmeter interface, can form a complete set of ABS plastic pipe, or with PVC plastic pipe, use special glue to connect, when a connection is also available plastic method and metal flange connection again. (3) flow meter must be installed vertically, should have no obvious tilt, its installation height, should be easy for the reading of the float, readings, the line of sight and float should be level. (standard: need flow for flow meter big flow of 50% 70%, try not to use zui high number. ] [4] in the upstream and downstream of instrument import and export shall ensure that there are five times meter diameter of straight pipe. (5) by the lateral fluid pressure should be stable, such as fluid is too unstable, cause float fluctuations, cannot be measured correctly, upstream flow meter should be set buffer or setter. (6) plastic tube rotor flow meter should be installed vertically, the center line of the flowmeter and the vertical Angle should not exceed 5 degrees. Plastic tube rotameter used (1) instrument used, should slowly open upstream of the valve to open first, then use flowmeter downstream of the regulator to adjust flow. Instrument should be first to stop using upstream slowly closing valve, then close the instrument downstream flow control valve. (2) the instrument's value in the scribed line, according to the height of the float rises by float gauge reading present value. (3) when the cone tube and float sticky dirty, should be cleaned in time. (4) check the error of flowmeter, once within the prescribed error, should float switch and cone tube, or calibration again to get better accuracy. (5) by measurement of body with the flowmeter calibration medium, need to modify the value for. By type said above is all there is in this article, you are welcome to inquire me factory flowmeter selection, quotation, etc.

come in many forms, like coriolis mass flow meter emerson and digital fork density meter, and they all provide efficient solution for our v shape coriolis mass flow meter needs.

Beijing Sincerity Automatic Equipment Co., Ltd is a rapidly growing Manufacturing Company based in China. We offer a wide range of equipment that helps in fork density meter manufacturer which are safe, durable and economical. We provide mass flow meter, coriolis density meter, electromagnetic flow meter slurry,etc. more about and mass flow meter solutions are covered in Sincerity Flow Meter. Take a visit!

Beijing Sincerity Automatic Equipment Co., Ltd believes that the shorter the path between consumer and product, the more likely businesses are to convert more sales.