Effect of ambient temperature on gas flowmeter1

The influence of ambient temperature on the gas flowmeter The ambient temperature of the gas flowmeter's workplace has a close relationship with whether the electronic components of the meter can work stably. The influence of the ambient temperature has been fully considered and tested in the stage of instrument development and design. The working environment temperature range of the instrument will be specified in the selection data and installation instructions. The problem worthy of attention is that the integrated vortex gas flowmeter that has appeared in recent years installs the signal detection, signal processing, display and communication units of the instrument in the converter. For vortex flowmeters that measure high-temperature media, if the on-site heat preservation and heat insulation measures are not in place, the heat conduction and heat radiation of the measurement pipeline will cause the temperature rise of the converter and the internal electronic components to be too high, endangering the normal operation of the electronic components. At present, the normal operating temperature of most electronic devices is limited to below 60°C, while the ambient temperature range of instruments with LED devices may be lower, for example, below 30°C. Therefore, if the temperature of the electronic components in the converter cannot be guaranteed to be lower than 60°C, the integrated vortex flowmeter cannot be selected when selecting a meter. Only separate vortex flowmeters can be used, so that the converter can be installed in a place with a lower ambient temperature to avoid damage to electronic devices when the temperature exceeds the limit temperature. Features and uses of gas flowmeter: Gas flowmeter has the characteristics of high precision, long life, good repeatability, wide flow range, stable and reliable, etc. The method of testing gas quality to measure gas flow is currently in the leading position in China. The gas flow meter is suitable for precise measurement of gas quality. It converts the measured gas mass flow into the corresponding gas volume flow under standard conditions or gas mass flow under standard conditions.

This is an global standard which acts as a form of promise that Beijing Sincerity Automatic Equipment Co., Ltd manufatures according to the finest quality standards.

To receive more professional tips and super quality products for tuning fork liquid density meter, go to our website Sincerity Mass Flow Meter Manufacturers to place your order. Do not wait any longer.

The rosemount vortex flow meter-type mass flow meter is poised to lead the digital fork density meter market.

Beijing Sincerity Automatic Equipment Co., Ltd, which prides itself on mass flow meter for applying in different ways.