What are the wrong ways of installing the intelligent vortex flow meter

Abstract: The information on the wrong way of installing the intelligent vortex flowmeter is provided by the excellent flowmeter and flowmeter manufacturers. The intelligent vortex flowmeter is mainly used for the flow measurement of the medium fluid in the industrial pipeline, such as gas, liquid, steam and other media. No moving mechanical parts, so high reliability and low maintenance. Instrument parameters can be stable for a long time. The vortex flowmeter adopts piezoelectric stress type. More flowmeter manufacturers choose models and price quotations. You are welcome to inquire. The following is the article details about the wrong ways of installing smart vortex flowmeters. The intelligent vortex flowmeter is mainly used for the flow measurement of the medium fluid in the industrial pipeline, such as gas, liquid, steam and other media. No moving mechanical parts, so high reliability and low maintenance. Instrument parameters can be stable for a long time. The vortex flowmeter adopts piezoelectric stress sensor, which has high reliability and can work in the working temperature range of -20℃～+250℃. 1. The special flange of the vortex flowmeter cannot be welded with the sensor when welding the straight pipe section. 2. The vortex flowmeter should be installed so that the flow direction sign of the sensor is consistent with the flow direction of the fluid in the pipeline. 3. Before installing the vortex flowmeter sensor, the sealing ring must be placed in the groove of the flange. The position of the pressure and temperature measurement points, the pressure point is 3-5DN ​​downstream of the sensor, and the temperature measurement point is 5-8DN downstream. 4. When the vortex flowmeter measures high temperature medium, do not wrap the sensor connecting rod with heat insulating material. 5. The direction of the shielded cable connecting the sensor to the vortex flowmeter should be as far away as possible from the interference of strong electromagnetic fields. It is absolutely not allowed to be laid together with high-voltage cables. The shielded cables should be shortened as much as possible, and should not be coiled to reduce the distributed inductance. The maximum length should not exceed 200 meters. 6. Before installing the sensor in the vortex flowmeter, the pipeline must be cleaned. Flush out the impurities in the tube to avoid blocking the sensor after passing through. The pipeline for measuring the liquid must be filled with the liquid to be measured to prevent the interference of air bubbles. 7. The pipeline of the vortex flowmeter to measure the gas is to prevent the interference of the stored liquid. When replacing the probe body under high temperature and high pressure, it must be operated safely and protected from high temperature. The probe can be replaced under safe conditions after cooling down and depressurizing. Haines Automation Instrumentation is a professional manufacturer of electromagnetic flowmeters, turbine flowmeters, vortex flowmeters, magnetic flap level gauges, thermocouples, thermal resistances, bimetal thermometers and pressure gauges of various specifications, etc., as well as the production of various As a manufacturer of non-standard flowmeters, the company has advanced management level, modern professional production equipment, and accurate calibration devices. The above is the whole content of this article. You are welcome to inquire about the flowmeter selection and quotation of our factory. 'What are the wrong ways to install the smart vortex flow meter'

We are a performance driven culture that uses mass flow meter to ensure continuous improvement.

Above all, we expect to be a credit to the communities we serve, a valuable resource to our customers, and a place where our dedicated mass flow meter can grow and prosper.

Beijing Sincerity Automatic Equipment Co., Ltd is a initial company that supports expertise in searching marketing solutions.