What are the effects of serious water in the steam on the measurement results of the vortex flowmeter

Abstract: The information on the influence of serious water in the steam on the measurement results of the vortex flowmeter is provided by the excellent flowmeter and flowmeter manufacturers and quotation manufacturers. The steam vortex flowmeter is mainly used for the flow measurement of the steam medium fluid in the industrial pipeline. The steam vortex flowmeter is characterized by small pressure loss, large measuring range and high precision. , temperature, viscosity. For more flowmeter manufacturers to select models and price quotations, you are welcome to inquire. The following is the article details of the impact of serious water in the steam on the measurement results of the vortex flowmeter. The steam vortex flowmeter is mainly used for the flow measurement of the steam medium fluid in the industrial pipeline. The steam vortex flowmeter is characterized by small pressure loss, large measuring range and high precision. , temperature, viscosity and other parameters. (1) Flow in the horizontal pipe The gas-liquid two-phase flow structure in the horizontal pipe is related to the gas-liquid two-phase volume ratio and flow velocity. In the steam pipeline, since the volume ratio of condensed water in the wet steam is very small, it often shows a stratified flow, which enables the drainage facilities drawn from the bottom of the horizontal pipeline to receive a good drainage effect. When the flow rate is particularly high, it will also appear as an annular flow, that is, there is a liquid film on the pipe wall, and the central part of the pipe is a gas core with droplets. Due to the influence of gravity during horizontal flow, the lower liquid film is thicker than the upper pipe wall. (2) The experimental study on the flow in the vertical ascending pipeline proves that the basic structure of the gas-liquid two-phase flow in the vertical ascending pipeline includes the fine bubble-like flow structure, the slug-like flow structure, the block-like flow structure, and the fibrous ring-like flow structure. Flow structures and annular flow structures. However, due to the relatively small volume of condensed water in wet steam, the flow of excess water in the rising pipe often presents an annular flow structure. However, in the case of a particularly large amount of water, it will also appear as an annular flow structure with fibers. Among them, the fibrous fluid is actually condensed water in continuous strips. (3) The flow in the vertical descending pipeline In the vertical descending pipeline, the structure of the gas-liquid two-phase flow is very similar to the structure of the vertical ascending flow, but it is different. Not only the flow direction is opposite, but also the average flow rate is the same. The flow velocity of the liquid in the vertically descending pipe is much faster than that in the vertical ascending pipe. Haines Automation Instrumentation is a professional manufacturer of electromagnetic flowmeters, turbine flowmeters, vortex flowmeters, magnetic flap level gauges, thermocouples, thermal resistances, bimetal thermometers and pressure gauges of various specifications, etc., as well as the production of various As a manufacturer of non-standard flowmeters, the company has advanced management level, modern professional production equipment, and accurate calibration devices. The above is the whole content of this article. You are welcome to inquire about the flowmeter selection and quotation of our factory. 'What are the effects of serious water in the steam on the measurement results of the vortex flowmeter'

Using our Sincerity to differentiate our content, services and consumer products, we seek to develop the most creative, innovative and profitable entertainment experiences and related products in the world.

If you are interested in any of mass flow meter, please feel free to contact us.

We create a group of experts to promote the quality standard and innovative technology of mass flow meter.