Vortex flow meter selection suggestion

Abstract: The vortex flowmeter meter selection suggestion information is provided by the excellent flowmeter and flowmeter production and quotation manufacturers. Vortex flowmeter selection suggestions: 1. For total measurement, especially trade settlement occasions, it is recommended to use a 10VME flow sensor with pulse signal output instead of a 10VTE flow transmitter. Reason: The pulse signal output by the flow sensor is directly separated from the vortex. For more flowmeter manufacturers to select models and price quotations, you are welcome to inquire. The following is the details of the article selection suggestions for vortex flowmeters. Vortex flowmeter selection suggestions: 1. For total measurement, especially trade settlement occasions, it is recommended to use a 10VME flow sensor with pulse signal output instead of a 10VTE flow transmitter. Reason: The pulse signal output by the flow sensor directly corresponds to the vortex separation frequency and has the highest accumulative accuracy. The pulse signal transmission effect is better, and the price is lower than the flow transmitter. The flow transmitter is an analog signal output, with full scale accuracy and poor accumulative accuracy, which is not suitable for total measurement. 2. In general, flange-mounted flowmeters are recommended. It is more compact and less expensive than flanged flow meters. 3. In explosion hazard sites, explosion-proof flowmeters should be used. Since the explosion-proof instrument is not allowed to be used in Class 0 hazardous locations, and the explosion-proof instrument is not allowed to open the casing for circuit adjustment on site, it is strongly recommended that the user try to use the intrinsically safe explosion-proof vortex flowmeter. Only in special cases should consider the use of explosion-proof flowmeters. 4. Carefully select DIN/ANSI standard flowmeters. The actual diameter of the DIN/ANSI meter is inconsistent with the internal diameter of the GB international pipeline. When the measured pipeline is the GB international pipeline, if the flowmeter manufactured according to the DIN/ANSI standard is used, there will be problems in installation and use. Only when the pipeline is DIN/ANSI pipeline, the DIN/ANSI standard flowmeter is used. 5. The standard material 1Cr18Ni9Ti can be used in most conventional media, including some corrosive media and saturated steam and superheated steam. Non-special high corrosive media do not need to use special materials, because the latter is expensive and has a long processing period. The above is the whole content of this article. You are welcome to inquire about the flowmeter selection and quotation of our factory. 'Suggestions for Selection of Vortex Flow Meters'

In the office, various are considered essential since they are used to achieve particular tasks in the office. Among these , mass flow meter, rosemount coriolis mass flow meter, and fork density meter manufacturer are widely used.

If you are interested in any of mass flow meter, please feel free to contact us.

In various different types of rosemount vortex flow meter, insertion ultrasonic flow meter mass flow meter is one of the most commonly used.

Deeper connections between Beijing Sincerity Automatic Equipment Co., Ltd and customers can be made when we're thinking out of the box and meeting outside of manufacturing work.