The gas flow meter can be cleaned and maintained from several parts

The gas flowmeter can be cleaned and maintained from several parts. There are many occasions where the gas flowmeter can be applied, but no matter what the occasion is, the gas flowmeter will produce some dirt and wear during use, so users must use it during use. Regular cleaning and maintenance of the gas flowmeter is required, but wrong cleaning and maintenance will also affect the use of the gas flowmeter, so what are the maintenance skills of the gas flowmeter? Let me talk about it now, hoping to be useful to users. 1. Steps for wiping the granite surface of the flowmeter: 1. First wipe the surface with a dry fine cotton cloth or wiping paper to wipe off the dust or oil stains on the parts after measurement. 2. Then use a clean, fine dry cotton cloth to soak in industrial alcohol, and wipe the outer surface. Alcohol is volatile and will evaporate naturally. 3. If necessary, use granite maintenance oil to wipe. 2. Steps for wiping the mirror surface of the flowmeter: 1. First wipe the surface of the mirror lightly with the mirror paper, and do not use force to avoid damaging the mirror surface. 2. Use a cotton swab to dip in industrial alcohol, gently wipe the surface of the mirror, and wait for the alcohol to evaporate before reinstalling it. 3. Mirror cleaning can be divided into correction glass sheet and lens group in the lens. Since dust particles will cause black spots in the image, mirror cleaning is very important. After installation, the cleaning result needs to be observed again through the image. 3. The transmission part of the flowmeter: it is divided into a dry friction part and a lubricating part, and the dry friction part is divided into an air bearing and a toothless screw transmission mechanism. Maintenance steps for the lubrication part of the liquid flowmeter: 1. Wipe off the dust with a fine cotton cloth. 2. Add lubricating machine oil to the lubricating part of the liquid flowmeter, or add it from a grease gun. 4. Steps for wiping the surface of the flowmeter: 1. Wipe the flowmeter with a dry fine cotton cloth or wiping paper to wipe off the dust or oil. 2. You can also use an air blower to blow off the dust. 3. If necessary, use a clean fine dry cotton cloth dipped in industrial alcohol or lubricating oil to wipe the friction surface. Maintenance steps for the lubrication part of the liquid flowmeter: 1. Wipe off the dust with a fine cotton cloth. 2. Add lubricating oil to the lubricating part of the liquid flowmeter, or add it from a grease gun, etc. Be careful not to damage the appearance of the instrument. 3. Then use a clean and dry cotton cloth dipped in industrial alcohol to wipe the appearance of the instrument, especially the metal and non-metal surfaces.

At a time when technology is essential for mass flow meter, ensuring that it works in a symbiotic way with your human employees is key.

Serving others for customers a better life with mass flow meter for employees respect and opportunity.

A primary strategy is superior customer satisfaction. Beijing Sincerity Automatic Equipment Co., Ltd constantly analyzes market needs around the world to develop a full range of products for different use.

Beijing Sincerity Automatic Equipment Co., Ltd always believes that the average profitability of our company is sufficient.

Further dialogue of Sincerity Group between the approaches, the chapter concludes, could lead to actionable advice on more robust policies that drive both structural change and competitiveness upgrading.