The gas flow meter can be cleaned and maintained from several parts1

There are many occasions where the gas flowmeter can be applied, but no matter what the occasion is, some dirt and wear will occur during the use of the gas flowmeter, so users need to regularly clean and maintain the gas flowmeter during use. But wrong cleaning and maintenance will also affect the use of the gas flow meter, so what about the maintenance skills of the gas flow meter? Let me talk about it now, hoping to be useful to users. 1. Steps for wiping the granite surface of the flowmeter: 1. Wipe the surface with a dry fine cotton cloth or wiping paper to wipe off the dust or oil stains on the parts after measurement. 2. Then use a clean and dry cotton cloth to dip in industrial alcohol and wipe the outer surface. Alcohol is volatile and will evaporate naturally. 3. If necessary, use granite maintenance oil to wipe again. 2. Steps to wipe the mirror surface of the flowmeter: 1. First wipe the mirror surface gently with the mirror paper, do not use force so as not to damage the mirror surface. 2. Then dip a cotton swab with industrial alcohol, gently wipe the mirror surface, and wait for the alcohol to evaporate before putting it back. 3. Mirror cleaning can be divided into correction glass and lens group in the lens. Because dust particles will cause black spots in the image, mirror cleaning is very important. After installation, the cleaning result needs to be observed again through the image. 3. The transmission part of the flowmeter: it is divided into a dry friction part and a lubricating part, and the dry friction part is divided into an air bearing and a toothless screw transmission mechanism. Maintenance steps for the lubrication part of the liquid flowmeter: 1. Wipe the dust clean with a fine cotton cloth. 2. Add lubricating oil to the lubricating part of the liquid flowmeter, or add it from a grease gun. Fourth, the flow meter appearance cleaning steps: 1. First wipe the flow meter with a dry fine cotton cloth or wiping paper to wipe its dust or oil dust or oil and so on. 2. You can also use an air blower to blow off the dust. 3. If necessary, use a clean fine dry cotton cloth dipped in industrial alcohol or lubricating oil to wipe the friction surface. Maintenance steps for the lubrication part of the liquid flowmeter: 1. Wipe the dust clean with a fine cotton cloth. 2. Add lubricating oil to the lubricating part of the liquid flowmeter, or add it from a grease gun, etc. Be careful not to damage the appearance of the instrument. 3. Then use a clean and dry cotton cloth dipped in industrial alcohol to wipe the appearance of the instrument, especially the metal and non-metal surfaces.

Beijing Sincerity Automatic Equipment Co., Ltd thinks that customer satisfaction is one of the most important determinants of brand loyalty. High-quality service can be the difference between a one-time buyer and a lifelong repeat customer.

As manufacturers we are determined to be the very best in mass flow meter, regardless of the size, pedigree or inclinations of our competitors.

By building an connection around Sincerity Group and catering specifically to the craft beer crowd, Beijing Sincerity Automatic Equipment Co., Ltd was able to raise the capital and brand awareness needed to successfully break into the domestic market with a groundswell of support.

mass flow meter is receiving a great positive feedback in the market. And many of our clients are fully satisfied with it.