Several reminders for the installation of metal tube rotor flow meters

Abstract: Several reminders for the installation of metal tube rotor flow meters are provided by excellent flowmeter and flowmeter manufacturers and quotation manufacturers. 1. The flowmeter must be installed vertically. The measured fluid passes through the flowmeter from bottom to top. The inlet and outlet are guaranteed to have a straight pipe section that is 5 times the diameter of the meter. For the newly installed pipeline, the pipeline should be flushed before the flowmeter is installed. 2. In order to facilitate the maintenance and replacement of the flowmeter, the instrument is installed. For more flowmeter manufacturers to select models and price quotations, you are welcome to inquire. The following are some reminders for the installation of metal tube rotor flowmeters. 1. The flowmeter must be installed vertically. The measured fluid passes through the flowmeter from bottom to top. The inlet and outlet are guaranteed to have a straight pipe section that is 5 times the diameter of the meter. For the newly installed pipeline, the pipeline should be flushed before the flowmeter is installed. 2. In order to facilitate maintenance and replacement of the flowmeter, the bypass pipeline should be connected when the instrument is installed. 3. A valve should be installed upstream of the flow meter, and a flow regulating valve should be installed downstream of 5 to 10 times the diameter of the meter. For small-diameter meters, a filter should be installed upstream. If the measured medium contains magnetic substances, a magnetic filter should be installed in front of the flowmeter. 4. When the measured medium is dirty, the tube and float should be cleaned in time. 5. The measurement accuracy of the metal tube rotameter is generally 2.5. When the measurement accuracy is required to be high, the metal rotameter should not be selected. 6. For angle-type metal float flowmeters whose inlet and outlet are not in a straight line, pay attention to whether there is any residual air in the casing due to the displacement of the external float when used in liquids. Exhaust regularly. This is more important for small-diameter instruments, otherwise the flow indication will be affected significantly. 7. The instrument with liquid crystal display should avoid direct sunlight as much as possible, so as not to reduce the service life of the liquid crystal. 8. Avoid vibration. Including the vibration caused by the external and internal reasons of the pipe network 9. When the metal tube rotor flowmeter is densely installed with multiple instruments or the carbon steel process pipeline passes near the instrument, it is necessary to maintain a distance of more than 100mm from the instrument to avoid magnetic field interference. The above is the whole content of this article. You are welcome to inquire about the flowmeter selection and quotation of our factory. 'Several reminders for the installation of metal tube rotor flow meters'

For the study, researchers defined Sincerity as strategies to foster some social good, including programs that benefit community engagement, diversity, the environment, human rights and employee relations.

Sincerity is the vital link in the supply chain, adding value with efficient and cost-effective service and solutions for our customers and our suppliers.

Sincerity focuses on three key elements—process, people, and technology—the authors found that people of two seemingly opposite cultures are able to work together in a project-based environment to complement each other and reap mutual benefits for a win-win result.

is something that has been around for a few decades now, enjoying it's heyday back in the electromagnetic flow meter slurry.