Selection steps of turbine flow meter

Abstract: The information on the selection steps of turbine flowmeters is provided by excellent flowmeter and flowmeter manufacturers and quotation manufacturers. Turbine flowmeter is the main variety of impeller flowmeter, impeller flowmeter also anemometer, water meter and so on. The following will tell you about the selection steps of the turbine flowmeter. 1. Select the type. According to the physical properties of the fluid, the gas type and the liquid type are respectively used. For more flowmeter manufacturers to select models and price quotations, you are welcome to inquire. The following is the details of the article on the selection steps of turbine flowmeters. Turbine flowmeter is the main variety of impeller flowmeter, impeller flowmeter also has anemometer, water meter and so on. The following will tell you about the selection steps of the turbine flowmeter. 1. Select the type. According to the physical properties of the fluid, the gas type and the liquid type are respectively used for gas and liquid, which cannot be used universally. When the liquid viscosity exceeds 5mpa in the working state, the high viscosity type should be selected (there is no stereotyped product in China). The acid corrosion liquid is acid-resistant (there is no finalized product in China). 2. Confirm the available measurement objects. 3. Select the appropriate instrument according to the environmental conditions, and select the appropriate instrument according to the ambient temperature and humidity. If there is an explosive and flammable atmosphere around, an explosion-proof sensor should be selected. 4. According to the pipeline connection method, the sensor has two installation methods: horizontal and vertical. When installed horizontally, there are flange connection, threaded connection and clamping connection with the pipeline. Flange connections are used for medium-diameter pipes, threaded connections are used for small-diameter and high-pressure pipes, and clip-on connections are only suitable for low-pressure and small-diameter pipes. Vertical installation only has threaded connections. 5. Select the specification. According to on-site use conditions, such as flow range, pipe diameter, fluid pressure and temperature, installation position, etc. and performance requirements, such as accuracy, repeatability, display mode, etc., refer to the manufacturer's selection sample or user manual to select specific specifications and models. May not find a suitable one. Had to choose another flowmeter. Since there are many types and specifications of turbine flowmeters, especially the quality of products of different manufacturers is different, it is necessary to collect manufacturers and relevant standards as much as possible and conduct repeated investigations and comparisons before deciding whether to choose. The above is the whole content of this article. You are welcome to inquire about the flowmeter selection and quotation of our factory. 'Selection Steps of Turbine Flow Meters'

Beijing Sincerity Automatic Equipment Co., Ltd is different from other companies as we provide timely and unique services to our respected clients.

With continuous operational improvements, expanding capacity and a strong competitive position for serving strategic domestic markets, Beijing Sincerity Automatic Equipment Co., Ltd are positioned for long-term growth that will benefit our customers and investors.

According to the latest social survey, more than 50 percent of consumers (across all age demographics) follow a brand before purchasing a product. Therefore, Sincerity's content can make or break a customer's decision to conduct business with you.