Abstract: The information on the maintenance precautions of the propeller
flow meter is provided by the excellent flowmeter and flowmeter manufacturer and quotation manufacturer. 1. The instrument and all accessories should be stored in the instrument box (except the measuring rod), and the environment should be dry and ventilated. 2. Before using the instrument, you should read the manual carefully, and you must be familiar with the structure of the instrument and the method of disassembly and cleaning, otherwise you cannot disassemble it casually. 3. Every time. For more flowmeter manufacturers to select models and price quotations, you are welcome to inquire. 1. The instrument and all accessories should be stored in the instrument box (except the measuring rod), and the environment should be dry and ventilated. 2. Before using the instrument, you should read the manual carefully, and you must be familiar with the structure of the instrument and the method of disassembly and cleaning, otherwise you cannot disassemble it casually. 3. After each measurement is completed, the instrument should be cleaned or disassembled and refueled in time. 4. During use, if the rotating parts are found to be loose, or the gap between the front bushing and the body frame becomes larger, stop using it immediately, check it, and reinstall it. There may be the following two reasons for this situation: (1) The pressure cap is loose, and the bearing is loosened. In this case, the instrument needs to be disassembled and re-installed. (2) The shaft fixing screw is not tightened, and the propeller shaft slides outward. At this time, just adjust the position and re-tighten it. 5. If there is no water in the inner cavity of the propeller, do not disassemble the bearing, just shake it in gasoline to clean it. 6. When brushing the bearing, only use a soft small clock brush, not a hard brush, so as not to damage the finish of the marble. 7. When the bearing is in use, it should be carefully cleaned and oiled. In long-term storage, it should be taken out for inspection every six months, and refueled. If rust is found, it should be cleaned immediately; if it cannot be repaired, it should be sent to the manufacturer for repair and re-inspection. The above is the whole content of this article. You are welcome to inquire about the flowmeter selection and quotation of our factory. 'Precautions for Maintenance of Rotary Velocity Meter'
Beijing Sincerity Automatic Equipment Co., Ltd helps high-profile clients build strategic relationships that drive company growth, investments, funding and more. There are many make-or-break details involved in the day-to-day manufacturing within our company.
If you are looking for coriolis density meter
mass flow meter, we have plenty of them in our store. We have tuning fork liquid density meter and many others. Visit Sincerity Flow Meter to know more.
coriolis mass flow meter emerson has become a serious problem for an increasing number of people around the world, that's why highly effective are developed by Beijing Sincerity Automatic Equipment Co., Ltd.
mass flow meter are less complex compared with rosemount coriolis mass flow meter.
