Main installation methods of ZK-LWGY liquid turbine flowmeter and precautions during installation

Abstract: The main installation methods of ZK-LWGY liquid turbine flow meter and the precautions in installation are provided by excellent flow meter and flow meter manufacturers and quotation manufacturers. The main installation methods of liquid turbine flowmeters and the precautions for installation, Huaian Zhongkong Automation Instrument Co., Ltd. specializes in the production of liquid turbine flowmeters, and at the same time solves your installation problems in the project, negotiate! 1. Installation of turbine flowmeter: 1. Variable. For more flowmeter manufacturers to select models and price quotations, you are welcome to inquire. The following are the main installation methods of ZK-LWGY liquid turbine flowmeters and the details of the installation precautions. The main installation methods of liquid turbine flowmeters and the precautions for installation, the instrument specializes in the production of liquid turbine flowmeters, and at the same time solves your installation problems in the project, negotiate! 1. Installation of turbine flowmeter: 1. The power cord of the transmitter adopts metal shielded wire, and the grounding should be good and reliable. The power supply is DC 24V, 650Ωimpedance. 2. The transmitter should be installed horizontally, avoid vertical installation, and ensure that there are suitable straight pipe sections before and after it, generally 10D in the front and 5D in the rear. 3. Ensure that the flow direction of the fluid is consistent with the direction of the arrow on the instrument shell, and must not be installed in reverse. 4. The measured medium must not corrode the turbine, especially the bearing, otherwise measures should be taken. 5. Be careful not to collide with the magnetic induction part. Second, the turbine flowmeter should pay attention to: 1. Before installing the turbine flowmeter, the pipeline should be cleaned. When the measured medium is not clean, a filter should be added. Otherwise, the turbine and bearings are easily stuck, and the flow rate cannot be measured. 2. When disassembling the flowmeter, the magnetic induction part cannot be collided. 3. Set the instrument coefficient before putting into operation. Check carefully to make sure that the wiring of the instrument is correct and the grounding is good before power transmission. 4. When installing the turbine flowmeter, the front and rear pipeline flanges should be horizontal, otherwise the pipeline stress will have a great influence on the flowmeter. The above is the whole content of this article. You are welcome to inquire about the flowmeter selection and quotation of our factory. 'Main installation methods of ZK-LWGY liquid turbine flowmeter and precautions during installation'

Beijing Sincerity Automatic Equipment Co., Ltd guarantees to providing quality products and services.

To live healthy, you need to eat healthy; to eat healthy, you need to think healthy; to think healthy, you need to read health; to read healthy, you need to follow Sincerity Flow Meter.

Beijing Sincerity Automatic Equipment Co., Ltd integrates research streams on team diversity and knowledge boundaries, and present a framework that considers the kinds of specific knowledge boundaries that must be spanned to achieve high-level, cross-boundary teaming.

Our company is professional in manufacturing mass flow meter especially vortex flow meter manufacturer.