LZ glass rotameter scale installation considerations

Abstract: LZ glass rotameter scale installation note information produced by excellent flow meter, flow meter manufacturer to offer you the quotation. Glass rotameter when use should pay attention to the following points 1, use should pay attention to keep warm in winter, if you don't use at night, be sure to put the flowmeter in the residual liquid, so that the glass tube is frozen. 2, because the glass tube is easily damaged, so in the glass. More flow meter manufacturers choose model price quote you are welcome to inquire, here is the LZ glass rotameter scale installation considerations article details. Glass rotameter when use should pay attention to the following points 1, use should pay attention to keep warm in winter, if you don't use at night, be sure to put the flowmeter in the residual liquid, so that the glass tube is frozen. 2, because the glass tube is easily damaged, so get the glass rotor flow time, first observe whether glass rotameter inside the glass tube is in good condition. 3, remove the fixture, gently to see if the rotor can free sliding up and down. If not free sliding, lightly of vibration plate, so that you could slip on the general. If cannot slide again, you need please teardown professional and technical personnel to solve. (4), in the pipe installation, the first to see whether, the downstream piping on a straight line. If not in a straight line, not only affects the measurement accuracy of instrument, but also damage the instrument. 5, be sure, at two o 'clock in front of the party can begin to use. When using the operator should read the instruction first. When open valve must be slowly open, if estimated flow can float rotor and rotor did not move up, then immediately stopped to open the valve, tap the pipe at the same time, make the rotor can slowly rising. There are a lot of operators to open valve too hard, just put on the new equipment, fiercely a open valve caused the glass rotor flow meter inside the inside of the glass rotor flow meter glass tube. It should be noticed by the user. 6, safe use, some operators like to remove the front cover is used, it is not allowed, because the glass tube blasting, cover is removed, protective casing. So you can't remove the cover. Above is all there is in this article, you are welcome to inquire me manufacturer flowmeter selection, quotation, etc.

mass flow meter is not something to be ignored or taken for granted. It is there to keep your tuning fork liquid density meter comfortable year round. To find a cost effective solution, turn to Beijing Sincerity Automatic Equipment Co., Ltd.

To find an ideal of your need, please visit my site Sincerity Flow Meter.

We persevere in keeping the customers pleasant and supporting them with mass flow meter at a reasonable price.