Installation method of sewage flow meter and pipeline connection

Abstract: The information on the installation method of sewage flow meter and pipeline connection is provided by excellent flow meter and flow meter manufacturers. Installation method of sewage flowmeter and pipeline connection: Sewage flowmeter is a flow surface with high precision, high reliability and long service life. It is based on Faraday Electric. More flowmeter manufacturers select models and price quotations. You are welcome to inquire. The following are the details of the installation method of sewage flowmeters and pipelines. Installation method of sewage flowmeter and pipeline connection: sewage flowmeter is a flow surface with high precision, high reliability and long service life. It is composed of a sensor that directly contacts the pipeline medium and an upper-end signal converter. It works according to Faraday's law of electromagnetic induction and is used to measure electrical conductivity greater than 5μThe flow rate of conductive liquid in s/cm is a surface that measures the flow rate of conductive medium. In addition to measuring the flow of common conductive liquids, it can also be used to measure strong corrosive liquids such as strong acids and alkalis, and liquids that evenly contain liquid-solid two-phase suspension, such as mud, pulp, paper pulp, etc. Before the customer purchases the sewage flowmeter and uses the sewage flowmeter, the first thing to do is to connect the electromagnetic flowmeter with the pipeline. The connection method is also different from that of the pipeline. The connection methods are as follows: 1. Flange connection: This connection method is relatively traditional. Both ends of the sewage flowmeter have flanges that can be connected. At times, as long as the flanges at both ends and the flanges on the pipeline are fixed with bolts, this connection can be installed in one direction. This type of connected sensor is relatively small and is only suitable for use in small pipelines. 2. Clamping connection: This connection method is relatively advanced. Some sewage flowmeters without flanges use this connection, which can be clamped between the two flanges of the pipeline with bolts, and the connection method is relatively simple. It is necessary to know the installation method of the sewage flowmeter, so that there will be no errors when clamping and connecting. 3. Threaded connection: There are also some small-diameter sewage flowmeters that use threaded connection, which is usually used in the medical and food industries. In addition, this connection also has certain applications in petroleum and exploration. 4. Clean connection: Now some small-diameter pipes use this connection. We often refer to the clean connection as a clamp connection. Through this connection, the sewage flowmeter can be quickly installed and disassembled. , its usual cleaning and protection is also very convenient. The above is the whole content of this article. You are welcome to inquire about the flowmeter selection and quotation of our factory. 'Installation method of sewage flow meter and pipeline connection'

need huge investment, so it is important to shop with caution.

Get cost effective and professional electromagnetic flow meter slurry advice for your solution at Sincerity Flow Meter. Beijing Sincerity Automatic Equipment Co., Ltd expert is your first choice!

As the full potential of endress hauser coriolis mass flow meter lies in , the demand for is increasing globally, and is being adopted across the global market.