Installation method of common flow meter

Abstract: Information on the installation methods of common flow meters is provided by excellent flowmeter and flowmeter manufacturers and quotation manufacturers. Flow measurement includes the measurement of liquid, gas, steam and solid flow. , The focus of chemical and petrochemical production is the detection and control of gas, liquid and steam flow. The flow is divided into two types: instantaneous flow and cumulative flow. Instantaneous flow refers to unit time. More flowmeter manufacturers choose models and price quotations. You are welcome to inquire. The following are the details of the installation methods of common flowmeters. Flow measurement includes the measurement of liquid, gas, steam and solid flow. , The focus of chemical and petrochemical production is the detection and control of gas, liquid and steam flow. The flow is divided into two types: instantaneous flow and cumulative flow. Instantaneous flow refers to the amount of fluid flowing through a certain section of the pipeline per unit time, and the amount displayed by the flowmeter is generally the instantaneous flow. The cumulative flow refers to the fluid flowing through a certain section of the pipeline within a certain period of time. 1-flange connection, 2-gasket, 3-bolt; 4-nut. time); 6-Isolation container. 7 All the way through the terminal connector. 8- ferrule type ball valve (PN25) or ferrule type globe valve (PN64); 9-seamless steel pipe; 10- straight through plate joint. 11-Pressure gauge straight-through joint. 12-Stuffing box Note: 1. When the pipeline does not need to be purged, the cut-off reading door near the transmitter should be installed on the dotted line. 2. When the pressure of the corrosive medium is on the side, for the convenience of maintenance, the isolator can also be installed near the top of the pressure transmitter. 3. When the isolation fluid is not replaced frequently, the side or top valve of the isolator can be replaced with a plug. (a) and (b) If there is not much sediment at the bottom of the isolator, the valve at the bottom can be cancelled. 1-Flange take over. 2-gasket, 3-bolt; 4-na female; 5-flange wedge-type single gate valve; 6-raised flange; 7-connector; 8-concave flange. 9-a convex flange cover; 10-terminal welding joint; 11-seamless steel pipe; 12-passing through the plate joint. 13-pressure gauge straight-through joint; 14-card sleeve ball valve; 15-three-way reducing joint; 16-three-way intermediate joint. 17-bend intermediate joint; 18-Borui rotameter. 19-constant difference relay; 20-through plate joint; 21-air source ball valve. 22 is a straight-through terminal joint; 23 is an air filter pressure reducer; 24 is a nylon single tube or copper tube. 25-Flange over, 26-Gasket, 27-Bolt. 28-Nut.2 must take pressure ball valve Note: 1. (a) suitable for fluidized bed equipment, (b) suitable for viscous or shoulder erosion medium, only the source part is different. 2. Transmitter as much as possible Install above the pressure tap point. Constant differential relays and rotameters with needle readings can be replaced with restrictive orifice plates. The above is the whole content of this article. You are welcome to inquire about the flowmeter selection and quotation of our factory. 'Installation method of common flow meter'

The average consumer is always looking for ways to save money while finding out solutions, is designed for killing two birds with one stone, providing a perfect solution to mass flow meter problems.

Beijing Sincerity Automatic Equipment Co., Ltd is proud to be recognized as some of the most important and influential providers for global customers.Visit us at Sincerity Flow Meter.

mass flow meter can also provide a new, productive option for business owners, if you're willing to use it.

Beijing Sincerity Automatic Equipment Co., Ltd will need to find one that fits our needs and budgets, and still turns out a quality product.