Installation and operating procedures for flow meters

Abstract: The information on the installation and operation procedures of the flow meter is provided by the excellent flow meter and flow meter production and quotation manufacturers. Several factors to pay attention to in the selection, installation, maintenance and maintenance of the flowmeter: 1. There should be no strong external magnetic field interference and strong mechanical vibration around the flowmeter. Before installation, the environmental conditions should be reviewed according to its use requirements for normal use; 2. When the flowmeter is installed outdoors. More flowmeter manufacturers choose models and price quotations. You are welcome to inquire. The following is the details of the installation and operation procedures of flowmeters. Several factors to pay attention to in the selection, installation, maintenance and maintenance of the flowmeter: 1. There should be no strong external magnetic field interference and strong mechanical vibration around the flowmeter. Before installation, the environmental conditions of use should be reviewed according to its use requirements for normal use; 2. When the flowmeter is installed outdoors, there should be a cover on the upper part to prevent the service life of the flowmeter from being immersed in rain and exposed to the sun; the flowmeter can be installed at any angle, and the direction of fluid flow is the same as the direction marked on the housing, and the flowmeter can be installed at any angle. 3. The upstream and downstream of the pipe are guaranteed to have 3DN and 1DN straight pipe sections respectively; The flowmeter should be installed coaxially with the pipeline, the flange screw hole connection should be parallel to the axis of the pipeline, and prevent gaskets and butter from entering the inner cavity of the pipeline; if necessary, a filter can be installed upstream of the flowmeter to filter out the medium. 4. When installing the flowmeter and measuring pipeline, consider installing the expansion pipe and bellows, and lay the upstream and downstream pipelines reasonably according to the actual size of the flowmeter to minimize the deformation of the flowmeter caused by the pipeline stress; 5 . The casing of the flowmeter volume corrector is provided with a grounding screw, which must be reliably grounded according to the designation, but shall not share the ground wire with the strong current system; when installing or testing on the pipeline, the ground wire of the electric welding system shall not be overlapped with the flow ground wire. 6. During use, the user shall not change the connection method of the explosion-proof system and arbitrarily change the lead interfaces. The outer diameter of the lead-in cable is 8-8.5mm, and the other lead-in holes should be blocked by plugging; the installation, use and maintenance must comply with the relevant regulations of the design code for electrical installations in explosion and fire hazard places; 7. When the flowmeter needs to have a signal When remote transmission, you should strictly follow the relevant“Electrical performance index 'connect to external power supply, it is strictly forbidden to directly connect 220VAC or 380VAC power supply at the signal output port; when installing the flowmeter, it is strictly forbidden to weld the connecting flange with the mark, and it is recommended to use process piping to avoid burning out the internal parts of the flowmeter; 8. The newly installed or overhauled pipeline must be strictly purged, and the flowmeter can be installed after removing the impurities in the pipeline. During the hydrostatic pressure test and pipeline cleaning operation, the meter should be removed and replaced with a process pipeline. The above is the whole content of this article. You are welcome to inquire about the flowmeter selection and quotation of our factory. 'Installation and Operation Rules for Flow Meters'

Beijing Sincerity Automatic Equipment Co., Ltd is different from other companies as we provide timely and unique services to our respected clients.

We would appreciate your immediate attention to mass flow meter.

You will have a v shape coriolis mass flow meter that looks endress hauser coriolis mass flow meter all the time, Because your is handling with it.