Installation and maintenance of TRD series turbine intelligent turbine flow meter

Abstract: TRD series turbine intelligent turbine flow meter installation and maintenance information is provided by excellent flow meter and flow meter manufacturers and quotation manufacturers. 1. Installation of TRD series turbine flowmeter: 1. The power line of the transmitter adopts metal shielded line, and the grounding should be good and reliable. The power supply is DC 24V, 650 impedance. 2. The transmitter should be installed horizontally, avoid vertical installation, and ensure that there are suitable straight pipe sections before and after it. More flowmeter manufacturers choose models and price quotations. You are welcome to inquire. The following is the details of the installation and maintenance of TRD series turbine intelligent turbine flowmeters. 1. Installation of TRD series turbine flowmeter: 1. The power cord of the transmitter adopts metal shielded wire, and the grounding should be good and reliable. The power supply is DC 24V, 650Ωimpedance. 2. The transmitter should be installed horizontally, avoid vertical installation, and ensure that there are suitable straight pipe sections before and after it, generally 10D in the front and 5D in the rear. 3. Ensure that the flow direction of the fluid is consistent with the direction of the arrow on the instrument shell, and must not be installed in reverse. 4. The measured medium must not corrode the turbine, especially the bearing, otherwise measures should be taken. 5. Be careful not to collide with the magnetic induction part. 2. Matters needing attention for TRD series turbine flowmeter: 1. Before installing the turbine flowmeter, the pipeline should be cleaned. When the measured medium is not clean, a filter should be added. Otherwise, the turbine and bearings are easily stuck, and the flow cannot be measured. 2. When disassembling and assembling the flowmeter, do not collide with the magnetic induction part. 3. Set the instrument coefficient before putting into operation. Check carefully to make sure that the wiring of the instrument is correct and the grounding is good before power transmission. 4. When installing the turbine flowmeter, the front and rear pipeline flanges should be horizontal, otherwise the pipeline stress will have a great influence on the flowmeter. Tianjin Runda Zhongke Instrument specializes in the production of electromagnetic flowmeters, turbine flowmeters, vortex flowmeters, insertion electromagnetic flowmeters, and sanitary turbine flowmeters. If there are various technical problems before use and use, our company, we We will do our best to solve your worries! The above is the whole content of this article. You are welcome to inquire about the flowmeter selection and quotation of our factory. 'TRD Series Turbine Intelligent Turbine Flow Meter Installation and Maintenance'

The single most important quality you'll need as Beijing Sincerity Automatic Equipment Co., Ltd is 'stick-to-it-iveness' or grit, a combination of perseverance, patience and adaptability.

Beijing Sincerity Automatic Equipment Co., Ltd promises you that you will be satisfied with our service.

Beijing Sincerity Automatic Equipment Co., Ltd is a initial company that supports expertise in searching marketing solutions.

The only cardinal rule with adding animation is to keep high-quality on mass flow meter.