How to properly install a turbine flow meter

Abstract: The information on how to correctly install the turbine flow meter is provided by the excellent flow meter and flow meter manufacturers. How to install the turbine flowmeter correctly to make it work normally, the installation method of the turbine flowmeter (mark with globe valve type: none; without globe valve type mark: T) impeller movement direction (Z axial direction; Q tangential direction) flow direction (Y One-way; S double ring) structure and installation. eddy. For more flowmeter manufacturers to select models and price quotations, you are welcome to inquire. The following is the article details of how to correctly install the turbine flowmeter. How to install the turbine flowmeter correctly to make it work normally, the installation method of the turbine flowmeter (mark with globe valve type: none; without globe valve type mark: T) impeller movement direction (Z axial direction; Q tangential direction) flow direction (Y One-way; S double ring) structure and installation. Installation of turbine flowmeter: 1) The power line of the transmitter adopts metal shielding line, and the grounding should be good and reliable. The power supply is DC 24V, 650Ωimpedance. 2) The transmitter should be installed horizontally, avoid vertical installation, and ensure that there are suitable straight pipe sections before and after it, generally 10D in the front and 5D in the rear. 3) Ensure that the flow direction of the fluid is consistent with the direction of the arrow on the instrument shell, and must not be installed in reverse. 4) The measured medium must not corrode the turbine, especially the bearing, otherwise measures should be taken. 5) Be careful not to collide with the magnetic induction part. 4) When the configuration and calibration of the turbine flowmeter are first installed, if the pipeline under test is not allowed to be interrupted, it can be completed first before the pipeline has been opened.“Mounting the base”Fix and seal on the pipeline, then install the ball valve, and then drill with a non-stop drilling rig. After drilling, remove the non-stop water drilling rig and install the sensor; or remove the non-stop water drilling rig and temporarily close the ball valve to install the sensor later. Turbine flowmeter is powered by 220V, 24V and lithium battery. The meter can display instantaneous flow and cumulative flow. When the user is used to measure large-diameter pipes and has different requirements for measurement accuracy, we can choose this meter as measurement. When selecting the type, it is necessary to confirm whether the medium temperature, pressure, and flow range meet the measurement requirements of the instrument. We must pay attention to product selection, pay attention to the correct installation of the product, and create a good operating environment for the flowmeter. The above is the whole content of this article. You are welcome to inquire about the flowmeter selection and quotation of our factory. 'How to properly install a turbine flow meter'

Beijing Sincerity Automatic Equipment Co., Ltd thinks that effective market design can improve liquidity, efficiency, and equity in markets.

For more tips and strategies on effective fork density meter manufacturer solutions, get your choice at Sincerity Flow Meter.

Beijing Sincerity Automatic Equipment Co., Ltd has a number of producing line for producing mass flow meter.