loading

Sincerity Group | Coriolis flow meter manufacturers| 

How to install the ultrasonic flow meter correctly

by:Sincerity Group     2022-08-07
Abstract: The information on how to install the ultrasonic flow meter correctly is provided by the excellent flow meter and flow meter manufacturer and quotation manufacturer. If the ultrasonic flowmeter display instrument is installed indoors, it should be selected to avoid interference sources such as frequency conversion control cabinets, and the power supply is 220V. Due to the installation location of the sensor, the state of the pipeline under test has a great impact on the measurement accuracy, so please choose the one that meets the the following conditions. More flowmeter manufacturers choose models and price quotations. You are welcome to inquire. The following is the article details on how to install ultrasonic flowmeters correctly. If the ultrasonic flowmeter display instrument is installed indoors, it should be selected to avoid interference sources such as frequency conversion control cabinets. The power supply is relatively clean 220V. Due to the installation position of the sensor, the state of the pipeline under test has a great influence on the measurement accuracy, so please choose the one that meets the Places under the following conditions. 1. The pipe has good roundness, smooth inner surface and uniform pipe wall. 2. For the straight pipe section above 5D on the upstream side and 3D on the downstream side, note“D is the inner diameter of the pipe”. 3. The pipeline under test must be filled with liquid. 4. There must be enough space for the installation and operation of the ultrasonic flowmeter sensor. 5. In the horizontal pipeline under test, the sensor should not be installed on the top and bottom of the pipeline, and avoid the unevenness of the pipeline and the welding seam. Installation of ultrasonic flowmeter sensor 1. Clean the paint, rust, dirt, etc. on the pipe wall on an area about twice the size of the sensor around the fixed installation position, and the exposed metal should be free of unevenness. 2. Install the fasteners on the pipeline according to Figures 1 and 2, and fix them on the pipeline with stainless steel strips, which should not be loose. 3. Lay the cable and connect it to the terminal in the junction box through the cable access hole. 4. After applying a thick layer of couplant (butter) on the front of the transducer of each ultrasonic flowmeter sensor, contact the transducer face of the transducer with the pipe wall, place it in the fastening assembly, and press the cover plate to seal the sensor. Press down and the couplant should squeeze out of the gap around the sensor to form a seal. Tighten the screws tightly, pay attention to the uniform force of the four screws, do not make the sensor offset. The above is the whole content of this article. You are welcome to inquire about the flowmeter selection and quotation of our factory. 'How to install the ultrasonic flow meter correctly'
Beijing Sincerity Automatic Equipment Co., Ltd has built its reputation on a commitment to providing quality products and services while rapidly responding to international needs for innovative products.
If you are looking for endress hauser coriolis mass flow meter mass flow meter, we have plenty of them in our store. We have tuning fork liquid density meter and many others. Visit Sincerity Flow Meter to know more.
We persevere in keeping the customers pleasant and supporting them with mass flow meter at a reasonable price.
Now that Beijing Sincerity Automatic Equipment Co., Ltd has become a leader in the space and have been able to scale appropriately, we are ready to expand to other cities.
By balancing the efficiencies of new technologies with the personal touch of highly trained and motivated professionals, Beijing Sincerity Automatic Equipment Co., Ltd is able to deliver solutions and services that exceed our customers’ expectations. We thereby earn their loyalty.
Custom message
Chat Online
Chat Online
Leave Your Message inputting...
Sign in with: