How to Connect Ultrasonic Flow Meter with Computer

Abstract: The information on how to connect the ultrasonic flowmeter with the computer is provided by the excellent flowmeter and flowmeter manufacturers. Ultrasonic flowmeter can be regarded as a cheap and high-quality instrument among all flowmeters. It can not only measure on site, but also save the measured data in the internal memory of its host after measurement. If you were. More flowmeter manufacturers select models and price quotations. You are welcome to inquire. The following is the article details on how to connect the ultrasonic flowmeter with the computer. Ultrasonic flowmeter can be regarded as a cheap and high-quality instrument among all flowmeters. It can not only measure on site, but also save the measured data in the internal memory of its host after measurement. If you want to analyze and study the measured data, you can upload the data stored in the memory to the computer at any time, and then analyze and print. So how do we connect the ultrasonic flowmeter to the computer? Today we will learn the steps of connecting the ultrasonic flowmeter to the computer. 1. Menu settings in the host of the ultrasonic flowmeter: 1. Press ON to turn on the instrument, and the instrument enters self-checking. (Press OFF to turn off) Enter the communication menu operation: press MENU, then press the number 5, 0, enter the M50 menu (data timing output option), the original factory default is“OFF OFF”, then the measured data will not be stored in the internal memory of the machine. If you want to take the measured data back and upload it to the computer for saving, the M50 menu should select as“ON ON”(This setting should be set before the on-site measurement, so that the data can be saved when the measurement starts. 2. Or you can also set it to“ON ON”, so that the value you save will skip the self-test, and all the data are the data when the meter is working normally. Or enter the M51 menu to record data within a specified time period, the M51 menu function settings will be discussed below). 3. In the M50 menu, press ENT, then press up ▲/+ or down ▼/ to select“ON ON”, and then press ENT to select the data timing output option as“ON ON”. chosen“ON ON”, the host will record and save the measured data. 4. M50 is selected as“ON ON”After the menu will automatically go to the next level“Choose output options”, there are 1-11 output options to be selected, including date and time, system status, current window, instantaneous flow, instantaneous flow rate, net accumulation, positive accumulation, negative accumulation, signal strength quality, working timing If you want to save the above data, press up ▲/+ or down ▼/ to select“ON ON”You can, if you don’t need to save, just press up ▲/+ or down ▼/ to select“OFF OFF”. 5. Press up▲/+ or down▼/ to enter the M51 menu (timed output time), set“Starting time”**/**/**(Minutes and seconds),“Intervals”**/**/** (hour/minute/second) and“duration”**/**/** (hour/minute/second), if you want to store the data in the memory as soon as the machine is turned on, you can only set the interval time (or not set, the factory default is 5 seconds sampling time). 6. Press up ▲/+ or down ▼/ to enter the M52 menu (output data flow direction control), you can choose 0, output to RS2321, store in the internal cache 2, cache => RS2323, clear the built-in cache.“1. Store in the in-camera cache”: Store the measurement data in the built-in memory of the main unit“2. Cache => RS232”: After the host is connected to the computer, select this option to automatically upload the memory data to the computer for saving, browsing or printing.“3. Clear the built-in cache”: Clear the data in the built-in memory of the host. 7. Press up ▲/+ or down ▼/ to enter the M53 menu (cache browser), press ENT to browse the data saved in the cache first. 2. Connect the host computer with the computer: 1. Press MEUN6, 0 or up ▲/+ or down ▼/ to enter the M62 menu (RS232 serial port setting). Press ENT to select the baud rate (such as 9600), and then automatically enter the parity digit selection after selecting.“No check digit (None)”. Note: The numerical selection of the baud rate of the host must be consistent with the selection of the baud rate of the computer in the third step below, otherwise an error will occur. 2. Connect one end of the random communication cable to the computer and the other end to the flowmeter host. The communication cable is a double-ended nine-pin female interface, one end is connected to the RS232 nine-pin interface of the host, and one end is connected to the computer's COM1 or COM2 nine-pin interface The public interface can be connected. 3. Computer Settings: Click on the lower left corner of the computer“start”=>“program”=>“appendix”=>“communication”=>“HyperTerminal”,Appear“connection description”window, enter a name you want and click“Sure”button, jump out“Connected to”window, select“use when connecting”of“COM1”or“COM2”wait, click again“Sure”button, jump out“COM1 or COM2 property”window, set interface properties:“bits per second”(Baud rate), select the same baud rate as the flow meter host M62,“data bits”for“8”,“parity bit”for“none”,“stop bit”for“1”,“data flow control”select“none”

With new and upcoming social commerce technologies, the biggest change for mass flow meter marketers will be a shift in focus from branding to lead generation and conversion.

Our mission is to operate the best specialty retail business in domestic, regardless of the product we sell. Because the product we sell is mass flow meter, our aspirations must be consistent with the promise and the ideals of the volumes which line our manufacture.

Our company is professional in manufacturing mass flow meter especially vortex flow meter manufacturer.