Turbine Flow Meter has the characteristics of high accuracy, good repeatability, convenient installation and maintenance, and simple structure.

Liquid turbine flow meter installation requirements:

Thermal mass flow meters have become For the equipment that will be used in the current enterprise, what matters should be paid attention to when using such a flow meter.

Ultrasonic flow meters enable users to perform flow measurement inspections at many points in the flow process without the need for permanent installation.

The thermal flow meter is a meter that detects the flow rate using the heat transfer principle, that is, the flow rate is detected according to the heat exchange between the fluid in the fluid and the heat source

Sincerity - Pioneering Coriolis mass flow meter manufacturer in China, since 1987.

According to the structural principle of the flow meter, it is divided into a volumetric flowmeter, a differential pressure flowmeter, a float flowmeter, a turbine flowmeter, an electromagnetic flowmeter, a fluid oscillation flowmeter, mass flow meter, and insert type. Flow meter, probe flowmeter.

Gas turbine flow meter is a new generation of high-precision, highly reliable gas precision instrument, with excellent low pressure and high pressure metering performance, a variety of signal output methods, and low sensitivity to fluid disturbance

Sincerity, excellence in Coriolis production for 33 years, since 1987. We are the pioneering coriolis mass flow meters factory in China. We produced the very first unit of coriolis mass flow meter in 1991.

The upper limit flow of the vortex flowmeter refers to the flow rate of the full scale. The diameter of the steam flow meter should be selected according to the flow range of the pipeline to be tested, the upper and lower flow limits of the selected instrument, rather than a simple selection based on the size of the connection.

Abstract: The vortex flowmeter can accurately measure the flow of liquid, gas, steam and other media. In actual work, due to various external reasons, the medium is impure, liquid and gas are so simple, it will be disadvantageous due to various factors. The flow measurement of the instrument (for example, the steam containing water during transportation will affect the accuracy of the vortex flowmeter).

Measures mass flow and density In a Coriolis meter, the material to be measured passes through one or more oscillating tubes; the rate at which mass flows affects the oscillation of the tubes, and from this both mass flow and density can be determined.

We can determine the value of the mass flow rate from the flow conditions. A units check gives area x length/time x time = area x length = volume. The mass m contained in this volume is simply density r times the volume. To determine the mass flow rate mdot, we divide the mass by the time.

Coriolis flow meters measure real mass flow, whereas thermal mass flow meters are dependent of the physical properties of the fluid. True mass flow measurement is an important development across industry as it eliminates inaccuracies caused by the physical properties of the fluid, not least being the difference between mass and volumetric flow. Mass is not affected by changing temperature and pressure. This alone makes it an important method of fluid flow measurement. Volumetric flow remains valid, in terms of accuracy, provided that the process conditions and calibration reference conditions are adhered to. Volumetric measuring devices, such as variable area meters and turbine flow meters, are unable to distinguish temperature or pressure changes.

If the pressure drop is acceptable, operate a Coriolis mass flowmeter in the upper part of its flow range because operation at low flow rates can degrade accuracy. Note that high viscosity fluids increase the pressure drop across the flowmeter. For liquid flows, make sure that the flowmeter is completely full of liquid. Be especially careful when measuring gas/vapor flow with Coriolis mass flowmeters. Pay special attention to installation because pipe vibration can cause operational problems.

The industries in order of higher to lower are chemical, oil and gas, food and beverage, pharmaceutical, pulp and paper, power, metals and mining, and water and wastewater followed by all others in small amounts.

Coriolis mass flowmeters measure the mass flow of liquids, such as water, acids, caustic, chemicals, and gases/vapors. Because mass flow is measured, the measurement is not affected by fluid density changes. Be particularly careful when using Coriolis mass flowmeters to measure gas/vapor flows because flow rates tend to be low in the flow range (where accuracy is degraded). Also, in gas/vapor applications, large pressure drops across the flowmeter and its associated piping can occur.

Coriolis mass flowmeters measure the force resulting from the acceleration caused by mass moving toward (or away from) a center of rotation. This effect can be experienced when riding a merry-go-round, where moving toward the center will cause a person to have to “lean into” the rotation so as to maintain balance. As related to flowmeters, the effect can be demonstrated by flowing water in a loop of flexible hose that is “swung” back and forth in front of the body with both hands. Because the water is flowing toward and away from the hands, opposite forces are generated and cause the hose to twist. They represent about 21% of all flowmeters sold. In a Coriolis mass flowmeter, the “swinging” is generated by vibrating the tube(s) in which the fluid flows. The amount of twist is proportional to the mass flow rate of fluid passing through the tube(s). Sensors and a Coriolis mass flowmeter transmitter are used to measure the twist and generate a linear flow signal.

The Coriolis Effect is named after French mathematician and physicist Gaspard-Gustave de Coriolis. ... In simple terms, the Coriolis Effect makes things (like planes or currents of air) traveling long distances around the Earth appear to move at a curve as opposed to a straight line.

The Coriolis Effect. If the Earth did not rotate on its axis, the atmosphere would only circulate between the poles and the equator in a simple back-and-forth pattern.

In physics, the Coriolis force is an inertial or fictitious force that acts on objects that are in motion within a frame of reference that rotates with respect to an inertial frame. ... When Newton's laws are transformed to a rotating frame of reference, the Coriolis and centrifugal accelerations appear.

Coriolis mass flow measuring principle. The operating principle of a Coriolis flow meter is basic but very effective. ... When a fluid (gas or liquid) passes through this tube the mass flow momentum will cause a change in the tube vibration, the tube will twist resulting in a phase shift.

A storm's rotation is due to something called the Coriolis Effect, which is a phenomenon that causes fluids like water and air to curve as they travel across or above Earth's Surface. Here's the basic idea. Earth is constantly spinning around its axis, from west to east.

The deflection is greatest at the poles and decreases to zero at the equator. The Coriolis Effect can be seen in action in the general circulation of the atmosphere. The winds at all latitudes to the north of 0° deflect to the right of their intended path in the Northern Hemisphere.

Because Earth s surface rotates at different velocities at different latitudes, objects in motion tend to veer to the right in the Northern Hemisphere and to the left in the Southern Hemisphere. The Coriolis effect is nonexistent at the equator but increases with latitude, reaching a maximum at the poles.

This results in the Coriolis effect being strongest at the poles, and weakest at the equator. Hold your breath: The eastward speed of air moving towards the equator from the Subtropical High is 866 mph, but as it moves south the land is moving faster than that.

The Coriolis effect (also known as the Coriolis force) refers to the apparent deflection of objects (such as airplanes, wind, missiles, and ocean currents) moving in a straight path relative to the Earth's surface. Its strength is proportional to the speed of the Earth's rotation at different latitudes

In physics, the Coriolis force is an inertial or fictitious force that acts on objects that are in motion within a frame of reference that rotates with respect to an inertial frame. In a reference frame with clockwise rotation, the force acts to the left of the motion of the object.

Definition of Coriolis force. : an apparent force that as a result of the earth's rotation deflects moving objects (such as projectiles or air currents) to the right in the northern hemisphere and to the left in the southern hemisphere.

Date: 18-20 August 2019

Date: 27-29 April 2019

Date:24-27 OCT. 2018

Date: 1-5 May 2019

Date: 16 March 2019