Correct installation method of glass rotor flow meter

Abstract: The information on the correct installation method of the glass rotor flowmeter is provided by the excellent flowmeter and flowmeter manufacturers and quotation manufacturers. 1. Newly installed pipes should be flushed first. 2. Before using and installing the glass rotor flowmeter, check whether the technical parameters such as: measuring range, accuracy level, rated working pressure, temperature and other parameters meet the requirements of use. 3. The flowmeter should be installed before installation. For more flowmeter manufacturers to select models and price quotations, you are welcome to inquire. The following is the article details of the correct installation method of glass rotor flowmeters. 1. Newly installed pipes should be flushed first. 2. Before using and installing the glass rotor flowmeter, check whether the technical parameters such as: measuring range, accuracy level, rated working pressure, temperature and other parameters meet the requirements of use. 3. Remove the top liner from the flowmeter for transportation protection before installation. And check whether the cone tube is damaged, whether the float can move up and down freely, and then install it after confirming that it is normal. 4. Vertically installed on a vibration-free pipeline, the angle between the center line of the rotameter and the plumb line should not exceed 5 degrees. Due to the heavy weight of the large-diameter flowmeter, measures such as reinforcement and support can be taken when necessary to avoid pipe bending. 5. The rotor flowmeter should be prevented from being damaged by excessive external force during installation, and the valve should be opened slowly. 6. If necessary, according to different working conditions in use, install a filter upstream of the rotameter to prevent impurities from entering the measuring tube and cause the float to be blocked. 7. If the fluid is unstable and has pulsating flow, in order to ensure good measurement of the rotameter, a buffer can be installed to eliminate the pulsating flow. 8. When the glass rotameter is in use, the control valve on the upstream pipeline of the flowmeter should be slowly unscrewed, and then the flow rate should be adjusted with the regulating valve, so as to avoid the sudden rise of the float and damage to the cone tube. 9. Finally, in order to obtain accurate measurement accuracy, it is recommended that the common flow rate of the fluid to be measured should be more than 60% of the graduated flow rate of the rotameter. The above is the whole content of this article. You are welcome to inquire about the flowmeter selection and quotation of our factory. 'The correct installation method of the glass rotor flow meter'

mass flow meter is a good way to humanize Sincerity and engage your target customers.

Sincerity Flow Meter has a whole range of different items to help you make an informed choice every time you make a purchase. Check it!

With the market analysts, exports from Beijing Sincerity Automatic Equipment Co., Ltd facilities in China will surpass the forecast.