Application of tap water flow meter

Abstract: The application information of the tap water flow meter is provided by the excellent flow meter and flow meter production and quotation manufacturers. (1) The structure is simple, there are no moving parts and disturbance parts or throttling parts that hinder the flow of the measured medium, and it is not easy to cause problems such as pipeline blockage and wear in the easy-adhesion and solid-liquid two-phase medium. It can make up for the lack of mass flow meters that are not easy to measure such media. (2) Electricity. More flowmeter manufacturers choose models and price quotations. You are welcome to inquire. The following is the application article details of tap water flowmeters. (1) The structure is simple, there are no moving parts and disturbance parts or throttling parts that hinder the flow of the measured medium, and it is not easy to cause problems such as pipeline blockage and wear in the easy-adhesion and solid-liquid two-phase medium. It can make up for the lack of mass flow meters that are not easy to measure such media. (2) Electromagnetic flowmeter is an instrument for measuring volume flow, and its measurement is not affected by changes in fluid density, temperature, pressure, viscosity, Reynolds number and conductivity within a certain range. The electromagnetic flowmeter only needs to be calibrated with water as the test medium, and can be used to measure other conductive liquids without additional correction. This is an advantage that other flow meters do not have. (3) The electromagnetic flowmeter has a large measurement range, and some products have a measurement range of 1000:1. For the same diameter sensor, its full scale can be set arbitrarily as long as the medium flow rate is within the range of 0.3~15m/s. The measurement range of the electromagnetic flowmeter can cover the two velocity distribution states of turbulent flow and laminar flow, which is incomparable with the differential pressure flowmeter, turbine type, vortex flowmeter and other flowmeters. (4) The measurement principle is linear, the measurement accuracy is high, and the complete electrical signal output, the measurement reflection speed is fast, the pulsating flow rate and the rapid accumulation total can be measured. (5) Good corrosion resistance. (6) In principle, the average flow velocity of the water-passing section is measured, and the requirements for the flow velocity distribution are relatively low. Therefore, the straight pipe section before and after the sensor is required to be shorter than other flow meters. (7) It can measure the flowing fluid in both positive and negative directions. The above is the whole content of this article. You are welcome to inquire about the flowmeter selection and quotation of our factory. 'Application of tap water flow meter'

This is an internationally recognized standard which acts as a form of guarantee that everything Beijing Sincerity Automatic Equipment Co., Ltd does is managed to the highest quality standards.

Above all, we expect to be a credit to the communities we serve, a valuable resource to our customers, and a place where our dedicated mass flow meter can grow and prosper.

There are so many factors that businesses have to weigh when producing mass flow meter, and we are not going to pretend to grasp all of them.