Advantages and disadvantages of sewage flow meters

Abstract: The information on the advantages and disadvantages of sewage flow meters is provided to you by excellent flow meters and flow meter manufacturers. 1. Advantages of sewage flowmeter (1) The measurement channel of sewage flowmeter is a smooth straight tube with no obstruction flow detection piece, which is not easy to block and is suitable for measuring liquid-solid two-phase fluids containing solid particles or fibers, such as pulp, coal-water slurry, ore pulp , mud and sewage. . More flowmeter manufacturers choose models and price quotations. You are welcome to inquire. The following are the advantages and disadvantages of sewage flowmeters for details. 1. Advantages of sewage flowmeter (1) The measurement channel of sewage flowmeter is a smooth straight tube with no obstruction flow detection piece, which is not easy to block and is suitable for measuring liquid-solid two-phase fluids containing solid particles or fibers, such as pulp, coal-water slurry, ore pulp , mud and sewage. (2) The sewage flowmeter does not produce pressure loss caused by the detection flow, and the resistance of the meter is only the resistance along the pipeline of the same length. The energy saving effect is remarkable, and it is most suitable for large-diameter water supply pipelines that require low resistance loss. (3) The volume flow measured by the sewage flowmeter is actually not significantly affected by changes in fluid density, viscosity, temperature, pressure and conductivity (as long as it is above a certain threshold). (4) Compared with most other flow instruments, the requirements for the front straight pipe section are lower. (5) The daily volume range is large, usually 20:1~50:1, and the optional flow range is wide. (6) The caliber range of sewage flow meters is wider than other varieties of flow meters, from a few millimeters to 3m. It can measure forward and reverse bidirectional flow, and also measure pulsating flow, as long as the pulsating frequency is much lower than the excitation frequency. The meter output is linear in nature. (7) It is easy to select the material varieties of the parts in contact with the fluid, which can be applied to corrosive fluids. 2. Disadvantages of sewage flowmeter (1) Sewage flowmeter cannot measure liquids with very low conductivity, such as petroleum products and organic solvents. Gases, vapors and liquids with many larger bubbles cannot be measured. (2) General-purpose EMF cannot be used for higher temperature liquids due to the limitation of lining materials and electrical insulating materials: some models of instruments are used for liquids below room temperature, and the insulation is damaged due to condensation or frost on the measuring tube. The above is the whole content of this article. You are welcome to inquire about the flowmeter selection and quotation of our factory. 'Advantages and Disadvantages of Sewage Flow Meters'

Over the years, has become very popular as more and more people are trying it out.

Beijing Sincerity Automatic Equipment Co., Ltd’s mission is to provide high quality care and services to our members and to be profitable in the process.

Beijing Sincerity Automatic Equipment Co., Ltd can promise you that we never conceded on the quality standards of our products.

Rewards and discount programs give customers more reason to come back for mass flow meter again, especially in the competitive retail and services markets.

If something seems too good to be true, then it can be a , which provides electromagnetic flow meter slurry value over its cost.